Mercedes-Benz ML430 Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(31)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(31)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Mercedes-Benz ML430 Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Mercedes-Benz ML430V8-4.3LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2000 Mercedes-Benz ML430V8-4.3LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1999 Mercedes-Benz ML430V8-4.3LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz ML430 Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(31)

Rating Summary
31
0
0
0
0
31
0
0
0
0

Samuel

25 years of experience
30 reviews
Samuel
25 years of experience
Mercedes-Benz ML430 V8-4.3L - Serpentine/Drive Belt - Collierville, Tennessee
Excellent

John

20 years of experience
573 reviews
John
20 years of experience
Mercedes-Benz ML430 V8-4.3L - Car is not starting - Orlando, Florida
He always takes his time to make sure that hge explains everything in order.

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Mercedes-Benz ML430 V8-4.3L - Other Inspections - San Jose, California

Anthony

28 years of experience
113 reviews
Anthony
28 years of experience
Mercedes-Benz ML430 V8-4.3L - Car is hard to shift - Shoreham, New York
Excellent mechanic ,lot of knowledge

Excellent Rating

(31)

Rating Summary
31
0
0
0
0
31
0
0
0
0
Number of Mercedes-Benz ML430 services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Causes Hoses to Leak?
While While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission fluid Coolant Power steering fluid Brake fluid...
How to Buy Good Quality Seat Covers
Kids, Kids, pets, even you – nearly everything that enters your vehicle is tough on your car seats. We live in our cars these days, and everything from sodas from lunch to glitter and mud are going to stick into...
P0446 OBD-II Trouble Code: Evaporative Emission Control System Vent Control Circuit Malfunction
P0446 code definition P0446 is an OBD2 diagnostic trouble code that indicates a fault within the evaporative emission control system. Other EVAP...

What does the multi-information display do?

The multi-information display is an optional piece of equipment available with some trim levels on the Honda Civic. If your car has one, consider it an expanded and enhanced version of the standard information display. It’s located above the steering...

Obd2 scanner not linking

When the scanner will not connect, usually the first thing we look for is a blow fuse or lack of power at the OBD2 connector. The most common cause of being unable to connect to the car is an issue...

question - broken ignition after car attempted to be stolen

I'm sorry to hear that someone attempted to steal your car (https://www.yourmechanic.com/article/how-to-keep-your-vehicle-safe-from-theft). Unfortunately, there is no temporary solution for this. The car will continue to act this way until the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) is repaired or replaced. With the ignition...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com