Mercedes-Benz ML400 Manifold Temperature Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,730)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,730)

Manifold Temperature Sensor Replacement Service

How much does a Manifold Temperature Sensor Replacement cost?

On average, the cost for a Mercedes-Benz ML400 Manifold Temperature Sensor Replacement is $202 with $31 for parts and $171 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz ML400V6-3.0L TurboService typeManifold Temperature Sensor ReplacementEstimate$268.48Shop/Dealer Price$315.36 - $385.12
Show example Mercedes-Benz ML400 Manifold Temperature Sensor Replacement prices

What is the Manifold Temperature Sensor all about?

Air is the single most important element for a running engine, even more so than fuel or oil. Without a flow of fresh, clean air, combustion cannot take place, and your engine cannot operate. However, simply ensuring that airflow can reach the intake is not enough. The car’s computer needs to know a lot of information about the temperature and quality of air entering the intake. The manifold temp sensor is responsible for determining the temperature of the air, and providing that information to the computer.

The computer will determine the density of the air and adjust the fuel flow to meet that. Depending on the make and model you drive, your car may have more than one manifold temp sensor. For instance, if you have a split manifold, you’ll have a sensor for each part. Like all other sensors on your car, the manifold temp sensor is subject to high heat and wear and tear. Electrical problems such as shorts and broken wires augment the list of potential troubles.

Keep in mind:

  • The manifold temp sensor is not part of any maintenance inspection.
  • The sensor can fail due to damage to the sensor or the wiring harness.
  • A failed sensor will activate your Check Engine light.

How it's done:

  • The air cleaner is removed for access
  • The defective manifold temperature sensor is removed
  • The new manifold temperature is installed and connected
  • The air cleaner assembly is reinstalled
  • The vehicle is started and checked for coolant leaks and sensor operation

Our recommendation:

Your manifold temp sensor is subject to considerable temperature extremes and will eventually fail. Without this component and the information it provides, the computer cannot determine the density of air entering the intake, resulting in an imbalanced air/fuel mixture. This causes rich or lean operation; both circumstances will damage the engine. If you suspect a problem with the manifold temperature sensor or experience the symptoms, have one of our expert mechanics diagnose the sensor.

What common symptoms indicate you may need to replace the Manifold Temperature Sensor?

  • Check Engine light is on
  • Erratic engine operation due to incorrect air/fuel ratio

How important is this service?

Having an operational manifold temp sensor is critical for vehicle operation. If your Check Engine light is on, or you experience fuel or acceleration related problems, this may be the cause. Because many other problems display similar symptoms, it is important to work with our expert mechanics to diagnose the actual issue and make the necessary repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Charles

11 years of experience
69 reviews
Charles
11 years of experience
Mercedes-Benz CLK350 V6-3.5L - Coolant Temperature Switch (Sensor) - Fort Lauderdale, Florida
Nice and friendly and on time

Victor

20 years of experience
41 reviews
Victor
20 years of experience
Mercedes-Benz ML350 V6-3.5L - Pre-purchase Car Inspection - Dallas, Texas
Detailed and thorough job!

Richard

35 years of experience
104 reviews
Richard
35 years of experience
Mercedes-Benz CLS550 V8-5.5L - Vehicle Drivetrain Inspection - New Port Richey, Florida
Came out on time took 40 min test drive found problem and ran scan to show the problem and I would recommend him highly knows his job well ! Thanks you Richard !

Stefan

17 years of experience
367 reviews
Stefan
17 years of experience
Mercedes-Benz ML320 V6-3.2L - Oil Change - Fremont, California

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Barometric Sensor
Common signs include poor engine performance, like sluggish acceleration, lack of power, and misfires, as well as the Check Engine Light turning on.
Symptoms of a Bad or Failing EVP Position Sensor
Common signs include poor cold start performance, the Check Engine Light coming on, and failing an emissions test.
How Long Does a Refrigerant Pressure Sensor (Switch) Last?
Your Your car’s air conditioning system helps keep you and your passengers cool and comfortable during hot weather. It also plays a role in operating the front defroster. In order to operate properly, the system needs a refrigerant – just...

Headlight leveling system on

The vehicle uses the headlight leveling system to make sure the vehicle's headlights shine as far and as safely as possible. When a fault occurs, you will see the check headlight light. A few different faults can cause this, such...

My 2004 Ford Explorer has the service engine light on and possible issue EGR

The two components work together to more smoothly recycle partially burned exhaust gases - rather than just dump them into the exhaust and the catalytic converter. The exhaust gas recirculation valve is the actual valve assembly which re-directs exhaust gases,...

Bought cheap crank shaft sensor, now a code is coming on.

Hi - regarding the crankshaft sensor - if the new one (cheap or otherwise) is not causing any misfire, it is just fine for now anyway. What code is "still coming up"? That is fairly important in the diagnostic process....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com