Mercedes-Benz ML320 Reduced Power light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(126)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(126)

Reduced Power light is on Inspection Service

How much does a Reduced Power light is on Inspection cost?

On average, the cost for a Mercedes-Benz ML320 Reduced Power light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz ML320V6-3.0L Turbo DieselService typeReduced Power light is on InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2003 Mercedes-Benz ML320V6-3.2LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1998 Mercedes-Benz ML320V6-3.2LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2009 Mercedes-Benz ML320V6-3.0L Turbo DieselService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2001 Mercedes-Benz ML320V6-3.2LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2002 Mercedes-Benz ML320V6-3.2LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2008 Mercedes-Benz ML320V6-3.0L Turbo DieselService typeReduced Power light is on InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2000 Mercedes-Benz ML320V6-3.2LService typeReduced Power light is on InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz ML320 Reduced Power light is on Inspection prices

A Reduced Power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in some cases will render the vehicle un-drivable.

Since the Reduced Power light can trigger for a number of different reasons, tracking down the exact cause is extremely important, if the vehicle is not properly diagnosed and repaired, the Reduced Power light will trigger again, putting the vehicle in safe mode.

How this system works:

When the vehicle’s computer detects a fault in the engine that affects its drivability, performance, transmission or emission system it will trigger the reduced power light. It will also trigger if there is an issue with the electronic throttle, the accelerator pedal or the throttle module.

When a vehicle goes into reduced power mode it will seriously impact its performance. Some vehicle will be restricted to idle speed while others restrict speed to 20-30 miles per hour. The Reduced Power trigger will save Diagnostic Trouble Codes (DTCs), which will indicate where the fault occurred. In most cases, a Restricted Power light is related to a throttle body or the connector.

Common reasons for this to happen:

  • Faulty Throttle Body: A throttle body is part of the of the air intake system which helps control the amount of air going into the engine. If a throttle body is failing the engine will not get the correct mixture of air and fuel. This can trigger the Reduced Power light as well as lead to a poor running engine. It can also trigger the Check Engine light.

  • Failing Throttle Position Sensor: The throttle position sensor tells the vehicle computer the position of the gas pedal. The computer uses this information to calculate the proper amount of air and fuel to send to the engine. The throttle position sensor also controls shifting the gears of a vehicle, which means that a faulty throttle position sensor will prevent a car from changing gears. If this part is failing, the Reduced Power light will trigger.

  • Faulty Engine Control Unit: The engine control unit is an essential component of a vehicles computer. It regulates and controls many systems, including the drive train and parts of the engine. If a fault is detected in this crucial part, it can trigger the Reduced Power light as well as the Check Engine light. This is a major issue that should be investigated as soon as possible.

  • Faulty Wiring: Exposed or damaged wires can cause issues with the any of these components and will possibly trigger the Reduced Power light. A loose wiring crimp can also be the culprit. Wiring issues can be tricky to track down so using a professional mechanic is a necessity.

  • Malfunctioning Oxygen Sensors: Oxygen sensors are responsible for measuring how rich or lean exhaust gases are leaving a vehicles combustion chamber. The vehicle’s computer uses this information to constantly adjust the amount of fuel going into the engine. A failing or dirty sensor can put too much or too little fuel into the engine. While a failing oxygen sensor will usually trigger a Check Engine light it is possible that the Reduced Power light could also trigger.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Reduced Power light issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your vehicle's air intake system, electrical wiring and sensors, including the throttle body and oxygen sensors, along with other important components. It may be necessary for the mechanic to test drive the car to verify the complaint and provide an accurate diagnosis.

How important is this service?

The Reduced Power light only illuminates if there is a serious issue with the vehicle that must be addressed immediately. In almost all cases, the throttle or the vehicles computer will be malfunctioning which can make driving the vehicle dangerous. While it varies by manufacturer, most vehicles that go into “safe mode” will stay there until the error codes are read by a code scanner.

If the vehicle Reduced Power light illuminates the vehicle should immediately be inspected, diagnosed and repaired.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(126)

Rating Summary
115
7
1
1
2
115
7
1
1
2

Fred

33 years of experience
7 reviews
Fred
33 years of experience
Mercedes-Benz ML320 V6-3.2L - Alternator - Marina, California
He was neat, organized, knowledgeable and fast. All that is very hard to find in a mechanic :) . Plus, Fred was very nice and polite. I would trust my car again to him with no doubt :)

Gurinder

11 years of experience
36 reviews
Gurinder
11 years of experience
Mercedes-Benz ML320 V6-3.2L - Car is not starting - Lawnside, New Jersey
Excellent experience! !!!

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Mercedes-Benz ML320 V6-3.2L - Alternator Repair - Renton, Washington
Theo was prompt and knowledgeable. He identified the problem and corrected same quickly. We will use the service again.

Alfred

13 years of experience
505 reviews
Alfred
13 years of experience
Mercedes-Benz ML320 V6-3.2L - Oil Change - San Francisco, California
He was a very nice and calm person being that I was at work and super busy.

Excellent Rating

(126)

Rating Summary
115
7
1
1
2
115
7
1
1
2
Number of Mercedes-Benz ML320 services completed
1386+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Cold Air Intake Last?
The The cold air intake’s purpose is to help bring cool air into the vehicle’s engine. It does not come standard on modern vehicles. Instead, it is an aftermarket part that can be added once you purchase the car. If...
How to Clean Your Car Cover
A A car cover (https://www.yourmechanic.com/article/how-to-cover-your-car-by-mark-vallet) can be a very handy tool for keeping the exterior of your car protected and clean. By using a car cover, you are protecting your vehicle from leaves, sap, dust, bird droppings, and all sorts...
P2017 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit High Bank1
P2017 code definition? Intake Manifold Runner Position Sensor/Switch Circuit High Bank1 What the P2017 code means The runner position sensor, also known...

Damaged steering column.

Hi. It's difficult for me to give you advice without knowing the extent of damage they did to your column. In some cases, all that needs to be replaced is the ignition cylinder and/or switch. This is a pretty simple...

Issue regarding acceleration

The model, year, and engine would definitely be helpful in diagnosing this problem. If it is a newer vehicle, then it is most likely going into failure mode due to some internal failure with the car's computer and a computer...

Passing gear

You should have the computer scanned and transmission linkage checked to see if the system has codes stored for transmission and shift linkage is not damaged and adjusted properly.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com