Mercedes-Benz GLC63 AMG Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(554)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(554)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz GLC63 AMG Brake Pad Replacement is $270 with $130 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$605.16Shop/Dealer Price$721.30 - $1061.62
2020 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$406.95Shop/Dealer Price$474.02 - $671.12
2019 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
2020 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$455.91Shop/Dealer Price$530.09 - $743.62
2021 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.79 - $701.30
2021 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$489.25Shop/Dealer Price$570.01 - $807.24
2019 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$406.95Shop/Dealer Price$474.05 - $671.16
Show example Mercedes-Benz GLC63 AMG Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(554)

Rating Summary
519
22
5
3
5
519
22
5
3
5

David

6 years of experience
27 reviews
David
6 years of experience
Mercedes-Benz GLC63 AMG V8-4.0L Turbo - Pre-purchase Car Inspection - Sugar Land, Texas
David was selected by Your Mechanic to conduct a re-inspection after the initial inspection failed to disclose obvious cosmetic defects. David was thorough in both his inspection of the areas under concern, as well as re-inspecting the entire vehicle's condition in the event the first inspection failed to reveal less obvious defects. David confirmed the suspect cosmetic defects and I'm now working with Your Mechanic to resolve the disparity from the initial PPI conducted which should have disclosed such defects. As to David, he provided a thorough inspection, commentary via voice memos, and appropriate media for me to fully grasp the nature of the car - what should have occurred the first go around. I appreciate his professionalism and I look forward to resolving the disparity with Your Mechanic's customer response team. Things don't always go to plan, the true measure of a company's worth, credibility, and trust, is how they respond to customer's when things deviate from plan. I'm hopeful that Your Mechanic's leadership team will persevere and remedy this situation in a timely fashion. Thank you.

Raul

35 years of experience
285 reviews
Raul
35 years of experience
Mercedes-Benz GL450 V8-4.6L - Brake Pads Replacement (Front) - Palo Alto, California

David

43 years of experience
220 reviews
David
43 years of experience
Mercedes-Benz ML350 V6-3.7L - Brake Pads Replacement (Front) - Atlanta, Georgia
He showed up early (that was great). He called to let me know he would be early and asked if that was ok. He finished the work as quoted and everything was great.

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Brake Pads Replacement (Front, Rear) - Sugar Land, Texas
Excellent job on my Mercedes

Excellent Rating

(554)

Rating Summary
519
22
5
3
5
519
22
5
3
5
Number of Mercedes-Benz Brake Pad Replacement services completed
6094+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2432 OBD-II Trouble Code: Secondary Air Injection System Air Flow/Pressure Circuit Low Bank 1
P2432 code definition The P2432 trouble code is a generic powertrain code related to the auxiliary emissions control system. This particular code...
P2284 OBD-II Trouble Code: Injector Control Press Sensor Circuit Range / Performance
P2284 means the Powertrain Control Module (PCM) has bad readings from the injector control pressure circuit, often due to low oil level or pressure.
Symptoms of a Bad or Failing Crankshaft Position Sensor
Common signs of a faulty crankshaft position sensor include issues starting the vehicle, intermittent stalling, and the Check Engine Light coming on.

AC blows hot and cold air at the same time

If you are getting normal cold air out of driver’s side and warm air out of center and passenger vents then you most likely have a bad temperature blend door actuator for the passenger side on the A/C evaporator case....

Shuddering shaking from take off through 1st and 2nd gear. What can cause this? I just bought the car and I'm scared I was ripped.

This is often a sign of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty transmission control solenoid. As you know, automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a...

Hazards work but turn signals don't. Replaced the circuit boards relay and bulbs. I have a 99 Grand Cherokee.

If the relay and fuses were replaced check to see if the flasher is working. If there is power to the flasher but nothing past the flasher, then the flasher needs replaced. If there is no power to the flasher...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com