Mercedes-Benz EQB 300 Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Mercedes-Benz EQB 300 Windshield Wiper/Washer System Inspection is $177 with $31 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Mercedes-Benz EQB 300ElectricService typeWindshield Wiper/Washer System InspectionEstimate$217.84Shop/Dealer Price$237.15 - $286.98
Show example Mercedes-Benz EQB 300 Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Mercedes-Benz SLK350 V6-3.5L - Windshield Wiper/Washer System Inspection - West Palm Beach, Florida
Jeremy was right on time and was able to fix my problem easily

Jerry

31 years of experience
48 reviews
Jerry
31 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Windshield Wiper/Washer System Inspection - Las Vegas, Nevada
Jerry did a great job. definitely knows MB. very clean operation.

Joseph

43 years of experience
55 reviews
Joseph
43 years of experience
Mercedes-Benz CLK320 V6-3.2L - Windshield Wiper/Washer System Inspection - Raleigh, North Carolina
Joseph was thorough. quick and knowledgeable. I am extremely satisfied with the entire experience.

Mark

12 years of experience
349 reviews
Mark
12 years of experience
Mercedes-Benz E320 L6-3.2L - Windshield Wiper/Washer System Inspection - Menlo Park, California
10/10, really! I came back to YM.com with my second car for Mark to diagnose some suspicious engine noise - cracked belt! Saved thousands due to timely preventive maintenance! Thanks, Mark!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz Windshield Wiper/Washer System Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Scion xB
If If you want an SUV because of the spacious interior, the 2012 Scion xB is a great choice. It’s easily one of the most affordable on the market. Key Features The four-cylinder power on the 2012 Scion xB may...
Is It Safe to Drive During the Second Trimester of Pregnancy?
Pregnant Pregnant women are definitely at a higher risk while behind the wheel, regardless of the stage of their pregnancy. Driving during the first trimester can be risky because of the potential for exhaustion and nausea. Driving during the third...
P0193 OBD-II Trouble Code: Fuel Rail Pressure Sensor Circuit High Input
P0193 OBD-II Trouble Code: Fuel Rail Pressure Sensor Circuit High Input Diagnostic Trouble Code (DTC): P0193 P0193 trouble code definition Fuel rail...

rpm

The tach needle was put back on wrong when you installed it. The tach needle shaft must have moved once you pulled the needle off. The shaft can be moved very easily by just tapping on the gauge. What you...

Car loses power and stalls/dies if under 2000 RPM

Hello there. There are a few possible problems could be causing your 1999 Nissan 200SX to stall in this manner. The most common would be a MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), vacuum leak, fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), battery...

The car starts to stall when I accelerate at high speed.

I would first check to see if the PCM has set any diagnostic trouble codes, including pending codes. Codes can be downloaded and evaluated by YourMechanic (http://www.yourmechanic.com) in the context of a Check Engine Light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). The camshaft and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com