Mercedes-Benz CL63 AMG Brakes, Steering and Suspension Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(70)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(70)

Brakes, Steering and Suspension Inspection Service

How much does a Brakes, Steering and Suspension Inspection cost?

On average, the cost for a Mercedes-Benz CL63 AMG Brakes, Steering and Suspension Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz CL63 AMGV8-6.3LService typeBrakes, Steering and Suspension InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2009 Mercedes-Benz CL63 AMGV8-6.3LService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2014 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2011 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$119.98 - $138.72
2010 Mercedes-Benz CL63 AMGV8-6.3LService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
2012 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2013 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeBrakes, Steering and Suspension InspectionEstimate$99.99Shop/Dealer Price$124.69 - $143.22
Show example Mercedes-Benz CL63 AMG Brakes, Steering and Suspension Inspection prices

The brakes, suspension, and steering systems are all major safety components of any vehicle. If something is going wrong with one of them it can seriously affect the performance and the safety of the car.

There can be simple issues such as worn brake pads, the wheels being out of alignment or leaking steering fluid to the more severe issues like a warped rotor, bad tie rods or failing struts.

Regardless of the issues, getting the brakes, suspension and steering systems inspected and repaired is key to making the car safe to drive.

How this system works:

Brakes

Brakes are available as disc or drums, older vehicles tend to have drum brakes while new models incorporate disc brakes. Both systems use friction and resistance to bring the vehicle to a stop.

Disc brakes have a rotor that is connected to the wheel. Brake pads grind against the rotor, creating friction, which brings the car to a stop. Over time, brake pads and rotors will wear down and have to be replaced.

Drum brakes work on the same principal. A drum is attached to the wheel and when the brake pedal is depressed, brake shoes press against the drum, slowing the vehicle. Brake shoes, like pads will wear out over time.

Suspension

The job of the suspension system is to maximize the friction between the tires and the road, as well as provide stability to the steering system. There are a number of different suspension systems. The main components of the suspension system are struts, shock absorbers, springs and tires.

The springs help to support the weight of the vehicle, they also maintain ride height, and absorb bumps in the road.

The shocks reduce the up and down motion of the car that is produced when the vehicle hits bumps on the road or highway.

Struts replace the shocks and springs on some vehicles. They combine the shock and spring into a single unit.

Tires keep the vehicle in contact with the road and provide traction to make driving safe.

Steering System

The steering system takes the rotation of the steering wheel and converts into the swiveling motion of the wheels.

A rack and pinion system uses a gear set that is enclosed in a metal tube. Both ends of the rack protrude from the end of the tube. A tie rod connects to each end of the rack and the pinion gear is attached to a steering shaft. As the steering wheel is turned, the gear spins which moves the rack.

Common reasons for this to happen:

Brakes

  • Loss of Hydraulic Pressure: The brake system uses hydraulic pressure to push the brake pads against the rotors. If there is a leak in the hydraulic system the brakes will not provide the correct stopping power.

  • Worn Brake Pads: Brake: Brake pads will wear out over time. The have a indictor that will make contact with the rotor and produce a squealing noise when they get too thin. If the brakes are squealing the pads should be replaced. If the squealing turns into a grinding noise, the pads have worn through completely, this can damage the rotors which is a much more expensive repair.

  • Stuck Caliper: The calipers push the brake pads against the rotors. If a caliper gets stuck the vehicle will pull to one side. A failing brake hose can cause this issue.

  • Warped Rotors: If the rotors are exposed to stress, such as towing or mountain driving, they can warp. Warped rotors will cause the vehicle to vibrate and shake while braking.

  • Worn Brake Shoes: This is basically the drum brake version of worn brake pads for disc brakes. The shoes will squeal when they are too thin and need to be replaced. A grinding noise indicates shoes that have been worn through completely.

Suspension

  • Worn Shocks or Struts: In most vehicles the struts will eventually wear out and need to be replaced. If you notice excessive bouncing when going over bumps, or the vehicle nosedives when braking, it may be time to replace the shocks or struts.

  • Uneven Tire Wear: A failing suspension system can lead to uneven tire wear as the system is not holding the wheels even on the road at the proper angle. Look for bald spots on your tires. Suspension problems should be inspected and repaired as soon as possible.

  • Bad Spring Coils: In most cases, spring coils will last the life of the car but they can break. If the vehicle is not driving smoothly or leaning heavily to one side, it could be an issue with the spring coils. This should be fixed immediately.

  • Leaking Shocks: Shocks will often have to be replaced over the life of a car. If there is oil leaking on the garage floor or a leak is visible from the shocks, it is time to get them replaced.

Steering

  • Bad Tie Rods: Tie rods are the component that connects the steering linkage to the wheels of a vehicle. Eventually tie rods will wear out. As they do the vehicle will go out of alignment and wear the tires faster. There may also be a squeaky sound and the steering wheel may be harder to turn.

  • Loose Lug Nuts: Something as simple as a loose lug nut will cause the steering wheel to shake. This is a fairly easy problem to fix.

  • Unbalanced Wheels: This problem can also cause the steering wheel to shake at certain speeds. At higher speeds this can become dangerous. The tires should balanced as soon as possible.

  • Steering Gearbox Not Responding or Hard to Steer: if the steering wheel does not seem to be responding properly or it is hard to steer this can indicate a problem with the steering gearbox. This issue can quickly become dangerous. The steering system should be inspected and repaired as soon as possible.

  • Power Steering Malfunction: The power steering component can malfunction for a number of reasons. Fluid may be leaking due to damaged seals on the power steering pump, or there could be a leak in one of the power steering hoses. A whirring or siren-like sound coming from the steering pump can be an indicator of this problem.

  • Power Steering Pump: A failing power steering pump can make the steering wheel hard to turn and it may make a groaning noise when the wheel is turned. A failing pump will eventually die and need to be replaced.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the brake, suspension or steering issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All three of these systems are vital to the safety of the vehicle. While some issues with these systems will be more of an inconvenience than a safety issue, other problems can lead to dangerous driving conditions and the problem should be addressed as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(70)

Rating Summary
62
5
0
1
2
62
5
0
1
2

David

13 years of experience
400 reviews
David
13 years of experience
Mercedes-Benz CL63 AMG V8-6.3L - Battery - Marietta, Georgia
Right on time. Great service.

Jermaine

24 years of experience
250 reviews
Jermaine
24 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Greenbelt, Maryland
Good Job .

Dana

25 years of experience
13 reviews
Dana
25 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Fairfax, Virginia
Job well done .

Rodney

36 years of experience
544 reviews
Rodney
36 years of experience
Mercedes-Benz GL450 V8-4.7L - Brakes, Steering and Suspension Inspection - Sacramento, California
Very knowledgeable and friendly

Excellent Rating

(70)

Rating Summary
62
5
0
1
2
62
5
0
1
2
Number of Mercedes-Benz Brakes, Steering and Suspension Inspection services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Get a Wyoming Driver's Permit
The The state of Wyoming uses a graduated driver’s license program which requires all new drivers under 17 years old to begin driving with a learner’s permit, in order to practice safe driving under supervision before getting their full driver’s...
P3450 OBD-II Trouble Code: Cylinder 7 Deactivation/Intake Valve Cotrol Performance
P3450 means intake and exhaust valves may not open on required cylinders due to low oil pressure, impaired oil movement in engine, or wiring.
Understanding the Mercury Intelligent Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mercury Intelligent Oil Life Monitor indicates when and what service your car needs.

Heater not working

Your vehicle has a control valve in the heater hoses the either blocks or allows the hot coolant to flow into the heating system. This control valve is operated by engine vacuum via several solenoids that are controlled by the...

Popping or clicking noise from middle of vehicle.

Hi there. It sounds like you could have a U-joint failing. These could be worn or have simply lost their lubrication, but either way will require replacement. An experienced ear and eye of a qualified technician is a valuable resource...

My temperature gauge went all the way up to the red line and came down but then I pulled over 2009 Dodge Avenger

Hello - there are a couple of scenarios which could cause this behavior. If the thermostat fails - sticking shut, or the water pump fails, the engine can overheat very quickly (in seconds) and behave as you describe. A coolant...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com