Mercedes-Benz CL55 AMG Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a Mercedes-Benz CL55 AMG Engine oil is black and gritty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeEngine oil is black and gritty InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2003 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2001 Mercedes-Benz CL55 AMGV8-5.5LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2002 Mercedes-Benz CL55 AMGV8-5.5LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$119.98 - $138.72
2005 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
2006 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
Show example Mercedes-Benz CL55 AMG Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Mercedes-Benz CL55 AMG V8-5.5L Turbo - Check Engine Light is on - Westminster, California
Very professional

Augie

31 years of experience
263 reviews
Augie
31 years of experience
Mercedes-Benz CL55 AMG V8-5.5L Turbo - Oil/Fluid Leak - Woodland Hills, California
WOW. Exceptional mechanic and diagnosed my oil leak quickly. His decades of experience are obvious. Very pleased with the results. He will be ordering the parts needed and I've got a new, reliable, friendly and expert mechanic for my car. He will be my go to guy from now on. Love this service. Can't stop smiling. Thank you Augie. You're a good man.

Mitchell

7 years of experience
30 reviews
Mitchell
7 years of experience
Mercedes-Benz CL55 AMG V8-5.5L Turbo - Serpentine/Drive Belt Replacement - New Orleans, Louisiana
Mitchell was prompt in making the appointment. I observed him at work and he is a consummate professional and very thorough. I am well pleased with Mitchell’s work.

Jerimiah

19 years of experience
328 reviews
Jerimiah
19 years of experience
Mercedes-Benz CL55 AMG V8-5.5L - Camshaft Position Sensor - Las Vegas, Nevada
A little bit tricky but he stuck with it and got it done

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mercedes-Benz CL55 AMG services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0073 OBD-II Trouble Code: Ambient Air Temperature Sensor Circuit High input
P0073 code definition Ambient Air Temperature Sensor Circuit High input Depending on the type of vehicle these are some related OBD-II Diagnostic...
How to Replace an AC Control Module
AC control modules fail when the air does not distribute fully. If the temperature is inconsistent, the control unit may be at fault.
P2300 OBD-II Trouble Code: Ignition Coil A Primary Control Circuit Low
P2300 means the battery voltage sent to the ignition coil is not correct due to faulty coil, circuit wires, or faulty PCM .

Won't start after warmed up.

Hello. If the vehicle starts after being allowed to sit for a while, then it may be possible that the issue is heat-related and goes away once the car cools down. If the vehicle will start with starting fluid, then...

My clutch pedal won't come back up fully. The main reservoir is full, even over the MAX.

There are typically a few different possibilities for why a clutch pedal will stay on the floor (https://www.yourmechanic.com/services/clutch-pedal-goes-all-the-way-to-the-floor-inspection). It could be a failed clutch master cylinder, slave cylinder, failed fluid line, or the clutch has failed. If there doesn't appear...

My check engine light is on , mechanic said it is catalyst converter however the car run perfectly fine , no misfire or more

The impact on engine operation (and fuel efficiency) of a "failed" catalytic converter depends on exactly what the failure mode was. In one scenario, if the catalyst within the converter is simply "poisoned" and thus there is no longer any...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com