Mercedes-Benz C55 AMG Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mercedes-Benz C55 AMG Water Pump Replacement is $872 with $340 for parts and $532 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz C55 AMGV8-5.5LService typeWater Pump ReplacementEstimate$1269.84Shop/Dealer Price$1474.25 - $2010.53
2005 Mercedes-Benz C55 AMGV8-5.5LService typeWater Pump ReplacementEstimate$1235.60Shop/Dealer Price$1423.23 - $1946.93
Show example Mercedes-Benz C55 AMG Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Robert

23 years of experience
343 reviews
Robert
23 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Serpentine/Drive Belt Replacement - Irving, Texas
Robert very professional and pleasant to deal with.

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Pre-purchase Car Inspection - Oakwood, Georgia
Shot straight with me. Highly recommended.

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Serpentine/Drive Belt - Dublin, California
Top notch professional arrived early and finished sooner than I expected. You can’t ask for more when you book Mr.Tien.

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Brake Rotor/Disc Replacement (Front) - Sugar Land, Texas
He was courteous, very quick and explained everything . Would hire him again

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Mercedes-Benz C55 AMG services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Window Motor / Regulator Assembly
Common signs include having to press multiple times to roll the window up or down, slower or faster window speed, and clicking sounds from the door.
How Long Does a Heater Blower Motor Last?
During During the colder parts of the month, you will start to rely more and more on your car’s heater. With all of the different components that are in place to ensure your heater works correctly, you may have a...
How to Replace an Automatic Shutdown Relay
The ASD (Automatic Shutdown) relay is failing when electrical functions in the vehicle are inoperative or when the car will not start.

DPF light, traction and engine lights flashing, car has no pulling power, dense blue/black smoke on each start.

Based on the information you provided, it is possible that a failed seal in the turbo is allowing engine oil into the intake. The result would be increases carbon buildup on your DPF (Diesel Particulate Filter). Usually a flashing Check...

hot air blows out driver side vents but only cold air out passenger side vents?

Hello, thanks for writing in about your Toyota 4Runner. Your A/C has separate temperature control actuators on the A/C evaporator case and the passenger side one may be stuck in cold position. Replace the actuator and it should fix the...

Car shut off while driving now tries to turn over but won't catch.

The fact that the vehicle started on starter fluid may be showing the problem. Fuel pressure must be checked. You installed a new pump, but if there is no power getting to the pump, or the ground is faulted then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com