Mercedes-Benz C55 AMG Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz C55 AMG Power Steering Pressure Hose Replacement is $557 with $375 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz C55 AMGV8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1026.38Shop/Dealer Price$1244.30 - $1871.74
2005 Mercedes-Benz C55 AMGV8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$938.87Shop/Dealer Price$1132.10 - $1698.38
Show example Mercedes-Benz C55 AMG Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Pre-purchase Car Inspection - Oakwood, Georgia
Shot straight with me. Highly recommended.

Matthew

18 years of experience
53 reviews
Matthew
18 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Alternator - Kansas City, Missouri
AAA first class job. On time for complicated job, completed within estimate. couldn't be happier.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - San Jose, California
Friendly and fast - new control arms were mounted and now my clunking issue is gone. Very happy!

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Mercedes-Benz C55 AMG V8-5.5L - Brake Rotor/Disc Replacement (Front) - Sugar Land, Texas
He was courteous, very quick and explained everything . Would hire him again

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Mercedes-Benz C55 AMG services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0077 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit High (Bank 1)
P0077 P0077 code definition Intake Valve Control Solenoid Circuit High (Bank 1) What the P0077 code means P0077 is a generic OBD2 code that is shown when there is a problem with the Bank 1 intake valve control circuit. This...
A Buyer’s Guide to the 2012 Acura TL
The The 2012 Acura TL has softened features, great fuel economy, and an overall fresh feel compared to past model years. The interior has an elegant and sporty feel to it making it comfortable to ride in. Furthermore, it costs...
How Long Does a Door Lock Actuator Last?
The The door lock actuator locks and unlocks your vehicle’s doors. The lock buttons are located on each of the doors, with a master switch on the driver’s door. Once the button is pressed, it triggers the actuator, allowing the...

What do you think of Kia as a brand?

Chain needs to be replaced

The reason a timing chain can take so long at a shop is because of the large amount of labor that it entails to perform a repair of that caliber. Many parts will need to be removed in order to...

Camshaft position timing over advanced

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com