Mercedes-Benz C300 Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz C300 Fuel Injector Replacement is $1125 with $747 for parts and $378 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2011 Mercedes-Benz C300V6-3.0L	Service typeFuel Injector Replacement	Estimate$1912.16	Shop/Dealer Price$2302.59 - $3435.59
2010 Mercedes-Benz C300V6-3.0L	Service typeFuel Injector Replacement	Estimate$1887.83	Shop/Dealer Price$2269.91 - $3396.65
2015 Mercedes-Benz C300L4-2.0L Turbo	Service typeFuel Injector Replacement	Estimate$5072.51	Shop/Dealer Price$6230.93 - $9682.04
2014 Mercedes-Benz C300V6-3.5L	Service typeFuel Injector Replacement	Estimate$7429.43	Shop/Dealer Price$9193.70 - $14466.02
2016 Mercedes-Benz C300L4-2.0L Turbo	Service typeFuel Injector Replacement	Estimate$3271.47	Shop/Dealer Price$3994.27 - $6121.99
2008 Mercedes-Benz C300V6-3.0L	Service typeFuel Injector Replacement	Estimate$1887.83	Shop/Dealer Price$2270.69 - $3398.02
2017 Mercedes-Benz C300L4-2.0L Turbo	Service typeFuel Injector Replacement	Estimate$3271.47	Shop/Dealer Price$3982.00 - $6100.53
2013 Mercedes-Benz C300V6-3.5L	Service typeFuel Injector Replacement	Estimate$7429.43	Shop/Dealer Price$9193.70 - $14466.02

Show example Mercedes-Benz C300 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(601)

Rating Summary

569

18

6

1

7

569

18

6

1

7

SEE REVIEWS NEAR ME

Maxwell

19 years of experience

390 reviews

Request Maxwell

Maxwell

19 years of experience

Request Maxwell

by Gopi

Mercedes-Benz C300 V6-3.0L - Brake Pads Replacement (Front, Rear) - Cypress, Texas

Very competent

Joe

21 years of experience

126 reviews

Joe

21 years of experience

by Mark

Mercedes-Benz C300 V6-3.0L - Oil Change - La Grange, Illinois

ABSOLUTELY WONDERFUL experience. Joe was 15 mins early on a Snowy Afternoon, preceded like a pro, oil changed, tired pressure adjustment, out the door in 50 mins. Joe is the man!!! Completely professional!!! ***** Trust this man, he will treat you right!

Daniel

12 years of experience

54 reviews

Daniel

12 years of experience

by Vanessa

Mercedes-Benz C300 L4-2.0L Turbo - Temperature gauge is maxed out - Sacramento, California

Very personable. He answered all my questions. Very professional and friendly.

John

37 years of experience

565 reviews

John

37 years of experience

by David

Mercedes-Benz C300 L4-2.0L Turbo - Oil Change - San Francisco, California

John was great. Very flexible with a unique issue we were having with YourMechanic, but took care of everything promptly and effectively. I will definitely look to book him next time I need my car serviced.

Excellent Rating

(601)

Rating Summary

569

18

6

1

7

569

18

6

1

7

SEE REVIEWS NEAR ME

Recent articles & questions

Symptoms of a Bad or Failing Blower Motor Relay

If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay.

P0328 OBD-II Trouble Code: Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0328 code definition P0328 is a general OBD2 diagnostic trouble code pointing to a fault within the knock sensor 1 circuit. What...

How to Use a Potato to Keep Your Car Windows Fog Free

Foggy car windows are a nuisance and block your view of the road. You can use a potato to keep your car windows from fogging up.

Intermittent rough idle

This may be a result of a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

All new clutch slipping

Hey Chris. If the clutch is slipping and the components are brand new, it's more likely that it's either not properly adjusted, or the pressure plate is not correctly installed. We have a pretty good article that explains the process...

My power steering pump pulley broke into pieces but pump spins freely, do I just need to replace the pulley?

Hi Bridgett. Thanks for contacting us today. When a pump spins freely as you've indicated, it's usually best to replace the pump, as it's possible that damage has been done to the pump when the pulley broke.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com