Mercedes-Benz C220 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz C220 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz C220L4-2.2LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1994 Mercedes-Benz C220L4-2.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1995 Mercedes-Benz C220L4-2.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz C220 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Joseph

17 years of experience
96 reviews
Joseph
17 years of experience
Mercedes-Benz C220 L4-2.2L - Clunking or knocking noise from wheels - Johns Island, South Carolina
Very knowledgeable with my European car, started engine and diagnosed problem immediately. Joseph even explained and showed my husband exactly what was causing the noise, and what can be done to solve it. He did not oversell and instead said that noise can be resolved quite easily with the right part and rest of the engine was in very good condition. A 50 point safety check was even performed. Would definitely use this service, and Joseph!

Jose

17 years of experience
154 reviews
Jose
17 years of experience
Mercedes-Benz C220 L4-2.2L - Oil Change - Las Vegas, Nevada
Jose showed up right on time. He was very knowledgeable and completed the job very quickly. He also suggested some other things that I might need but was not pushy. Thank you so much!

Eladio

10 years of experience
148 reviews
Eladio
10 years of experience
Mercedes-Benz C220 L4-2.2L - Car is not shifting into park - Kernersville, North Carolina
Thank you for time yesterday we really appreciate it.

Chris

16 years of experience
331 reviews
Chris
16 years of experience
Mercedes-Benz C220 L4-2.2L - 75 Point Safety Inspection - La Mesa, California
Fantastic! Chris was great. He saved me money. Do not wait. Have Chris come out today and fix your problem.. Thank you Chris.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Mercedes-Benz C220 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0755 OBD-II Trouble Code: Shift Solenoid B Malfunction
P0755 code means that there is a problem with the the shift solenoid B due to transmission failure, low or dirty fluid, or a faulty solenoid.
How to Replace a Ride Height Control Module
A bumpy ride, uneven ride height, or the illumination of the Air Ride Suspension Light may mean that the ride control module is faulty.
Industry News for Automotive Techs: September 10th-16th
New VW concept, dealership service assembly line, semi-autonomous vehicle device and new tools from Snap-On and Bolt Breaker top this week's news.

Heating hose has a pin hole in it

If one of your engine's coolant hoses has sprung a leak, it probably needs to be replaced. Leaks in the cooling system will cause the vehicle to overheat, and experience other problems. I would recommend having a professional technician, such...

My car is taking a lot of water and smoking when opened up??

If the car is using coolant and you can't find any leaks, it must be going out the tailpipe; and that would certainly explain the smoke. But it could also be that the coolant is leaking and evaporating just as...

The bolt that holds the plate for the power steering return lines, what size is it? Is it a torx? Is it a twelve point?

The bolt size that you need is 10 mm and the treads of 20 metric with a torque of 71 inch pounds. The best thing to do is take a thread gauge tool and check to see if the treads...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com