Mercedes-Benz 560SEC Power Steering Pump Replacement Costs

Car	Service	Estimate	Shop/Dealer Price
1991 Mercedes-Benz 560SECV8-5.6L	Service typePower Steering Pump Replacement	Estimate$1225.98	Shop/Dealer Price$1451.35 - $2092.02
1990 Mercedes-Benz 560SECV8-5.6L	Service typePower Steering Pump Replacement	Estimate$1203.46	Shop/Dealer Price$1421.10 - $2055.97

Car

Service

Estimate

Shop/Dealer Price

1991 Mercedes-Benz 560SECV8-5.6L

Service typePower Steering Pump Replacement

Estimate$1225.98

Shop/Dealer Price$1451.35 - $2092.02

1990 Mercedes-Benz 560SECV8-5.6L

Service typePower Steering Pump Replacement

Estimate$1203.46

Shop/Dealer Price$1421.10 - $2055.97

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

When to consider replacing the power steering pump:

Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
The threaded connectors to the pump inlet and outlet are loosened and removed.
Any mounting bolts and brackets are removed so the pump can be removed.
If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(9)

Rating Summary

SEE REVIEWS NEAR ME

Jason

33 years of experience

617 reviews

Request Jason

by Francis

Mercedes-Benz 560SEC V8-5.6L - Tighten belt cover and clean area - San Jose, California

I'm glad I found Jason to work on my car. He's terrific! He was friendly & gave sound advises & tips.

Paul

26 years of experience

280 reviews

Request Paul

by Nancy

Mercedes-Benz 560SEC V8-5.6L - Valve Cover Gasket - Las Vegas, Nevada

Paul did work on a older merecedes I own. I thought for sure I was,going to be in for a whole lot of money and be told there wasn't any other thing I could do. I was so wrong. Paul definitely knows his profession. I also couldn't be more pleased about price. My thanks to him and of course Your Mechanic for having a mechanic who knows what to do.

by PHILIP

Mercedes-Benz 560SEC V8-5.6L - Alternator Belt - San Mateo, California

Job done professionally with little or no issues.

Grzegorz

42 years of experience

473 reviews

Request Grzegorz

by barry

Mercedes-Benz 560SEC V8-5.6L - Car is not starting - San Francisco, California

He is a really pleasant man,who has a good attention to detail,as it happens there was no way to get the car started, due to what appears to be failed fuel pumps,which is what i suspected. I am 70 years old,fixing it has lost its appeal,and did not have all the tools to fix it with me.Therefore being a mechanic my self in the past, i can only say he knows what he is doing.If the parts were at hand he would have repaired it no problem i'm quite sure,so for me he gets top marks,in all departments. Yours sincerely Barry Vare

Mercedes-Benz 560SEC Power Steering Pump Replacement at your home or office.

Estimate price near me

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercedes-Benz 560SEC Power Steering Pump Replacement is $613 with $403 for parts and $210 for labor. Prices may vary depending on your location.

What is the power steering pump and how does it work?

When to consider replacing the power steering pump:

How do mechanics replace the power steering pump?

Is it safe to drive with a power steering pump problem?

When replacing the power steering pump keep in mind:

Meet some of our expert Mercedes-Benz mechanics

Excellent Rating

Rating Summary

Jason

Paul

Jason

Grzegorz

Excellent Rating

Rating Summary

Recent articles & questions

Electrical problems

Gas tank door burnt black.

Idle problems

How can we help?