Mazda Miata Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(238)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(238)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mazda Miata Water Pump Replacement is $592 with $144 for parts and $448 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mazda MiataL4-1.8LService typeWater Pump ReplacementEstimate$838.44Shop/Dealer Price$925.03 - $1156.43
1991 Mazda MiataL4-1.6LService typeWater Pump ReplacementEstimate$798.87Shop/Dealer Price$877.26 - $1098.00
1994 Mazda MiataL4-1.8LService typeWater Pump ReplacementEstimate$763.11Shop/Dealer Price$843.04 - $1069.46
1995 Mazda MiataL4-1.8LService typeWater Pump ReplacementEstimate$806.91Shop/Dealer Price$887.39 - $1114.22
1993 Mazda MiataL4-1.6LService typeWater Pump ReplacementEstimate$798.87Shop/Dealer Price$882.50 - $1107.17
1999 Mazda MiataL4-1.8LService typeWater Pump ReplacementEstimate$879.90Shop/Dealer Price$961.88 - $1189.83
2001 Mazda MiataL4-1.8LService typeWater Pump ReplacementEstimate$850.70Shop/Dealer Price$931.81 - $1159.10
1997 Mazda MiataL4-1.8LService typeWater Pump ReplacementEstimate$806.91Shop/Dealer Price$887.39 - $1114.22
Show example Mazda Miata Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(238)

Rating Summary
222
7
5
1
3
222
7
5
1
3

Corey

15 years of experience
184 reviews
Corey
15 years of experience
Miata 1992 - Tire Rotation - Charlotte, NC
Great experience.

Shawn

22 years of experience
62 reviews
Shawn
22 years of experience
Miata 1990 - Electric Problems - Virginia Beach, VA
Shawn is a great guy who wants to see your car running just as much as you do!

Eliud

20 years of experience
148 reviews
Eliud
20 years of experience
Miata 1993 - Car is not starting - Dacula, GA
Knowledgeable and awesome to talk too.

Collins

8 years of experience
362 reviews
Collins
8 years of experience
Miata 1997 - Coolant is leaking - Atlanta, GA
Wonderful and informative

Excellent Rating

(238)

Rating Summary
222
7
5
1
3
222
7
5
1
3
Number of Mazda Miata services completed
2618+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Get Saab Dealership Certified
Saab car dealerships offer automotive technician jobs to mechanics who are Saab certified through the GM Service Technical College.
How to Buy a Good Quality Turn Signal Bulb
A A turn signal is one of those things on your vehicle that you don’t often pay much mind to, but it’s a very important safety feature. Without this turn signal, how would people know which way you are planning...
P0389 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit Intermittent
P0389 means there is an issue with the crankshaft position sensor, likely due to the sensor having a bad wire or connector.

1995 Ford Taurus won't turn off

Hello! Sounds like you are now experiencing a common problem that many Taurus owners have experienced before. The problem is usually due to a broken plastic linkage in the steering column; the small plastic arm that connects the ignition cylinder...

Why would my check engine light continue to come on after replacing the EGR valve in my 2004 Chevrolet Impala

Hello. I would need to know which EGR code you are getting in order to be able to precisely tell you what may be going on. Most of the time if replacing the EGR valve does not solve the problem...

My car was recently in an accident, it was repaired but the insurance did not fix it completely. The shop that fixed the body of car was on the approved listing so we took the car their on their recommendation. They said that the code for the gas gauge is something to do with fuel sensor.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com