Mazda CX-90 Car is hesitating and bucking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4,896)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4,896)

Car is hesitating and bucking Inspection Service

How much does a Car is hesitating and bucking Inspection cost?

On average, the cost for a Mazda CX-90 Car is hesitating and bucking Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2024 Mazda CX-90L4-2.5L HybridService typeCar is hesitating and bucking InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2024 Mazda CX-90L6-3.3L Turbo HybridService typeCar is hesitating and bucking InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
Show example Mazda CX-90 Car is hesitating and bucking Inspection prices

When you press the gas pedal, you expect the engine to rev and the car to accelerate. If your fuel delivery system, ignition components and exhaust system are all working properly, that’s what happens. However, even just one problem in any of the systems mentioned could lead to your car hesitating and bucking under acceleration, during deceleration, or at idle.

How this system works:

When you press the gas pedal, the fuel pump sends gasoline through the fuel filter, up the fuel line, and to the injectors. The injectors “atomize” the gas, and spray it into the injectors (atomization just means it turns it into a very fine mist). There, the spark plugs ignite the gasoline, which combusts, moving the pistons and turning the engine.

Gasoline combustion creates fumes (exhaust), which must be vented. This is done through a relatively complex network of components. Most of the exhaust is sent through the exhaust manifold, the catalytic converter, and then out the exhaust pipe. Along the way, some of it is recirculated and burned again (using the EGR valve), and oxygen sensors monitor the exhaust process for the right levels of contaminants.

Common reasons for this to happen:

  • Clogged Fuel Filter: Over time and through normal use, your fuel filter will become dirty and clogged. When this happens, the flow of gasoline to your engine diminishes, which can cause hesitation and bucking.

  • Failing Fuel Pump: If your fuel pump begins to fail, it will not send the right amount of gasoline to the engine. Note that pumps can exhibit intermittent problems for a long time before they fail completely.

  • Failed Oxygen Sensor: If one of the oxygen sensors in your exhaust system has failed, the computer cannot monitor the emissions, and pressure may drop, creating hesitation and bucking.

  • Clogged EGR Valve: The EGR valve is a crucial component in the exhaust system. If it becomes clogged with carbon, it won’t operate correctly, and your engine may spit, sputter or hesitate.

  • Worn Out Spark Plugs and Wires: In order to combust gasoline correctly, your engine needs a steady spark and stream of electricity. This is provided by the spark plugs and wires. If they’re worn out, your engine may spit and sputter.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the engine and verify the hesitation and bucking, as well as when the condition occurs. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will connect a diagnostic computer to your car’s OBDII connection and read any trouble codes in the computer (even if the Check Engine light is not on, trouble codes may be stored). The mechanic may need to test drive the vehicle as well to verify the symptoms.

How important is this service?

You need reliable performance from your engine. Even if the hesitation and bucking doesn’t cause internal damage, it can be extremely disconcerting to drive while these symptoms are present. It can also compromise your safety on the road. Regular maintenance is the best way to protect against hesitation and bucking. Make sure you’re having the spark plugs, wires and fuel filter replaced regularly. You should also have any Check Engine light diagnosed immediately. One of our professional mechanics can troubleshoot, diagnose and repair your car, eliminating the hesitation and bucking during operation.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(4,896)

Rating Summary
4,605
154
37
19
81
4,605
154
37
19
81

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Mazda MX-5 Miata L4-2.0L - Car is hesitating and bucking - Irvine, California
Manuel did an awesome job explaining things very clearly and was very proffessional through the whole appointment. He was also very friendly and answered all of my car “newb questions” even though it wasn’t apart of the original appointment. I will definitely be using his services again :)

Joel

22 years of experience
987 reviews
Joel
22 years of experience
Mazda 6 L4-2.5L - Car is hesitating and bucking - Jacksonville, Florida
Great!

Paul

34 years of experience
134 reviews
Paul
34 years of experience
Mazda MPV V6-3.0L - Car is hesitating and bucking - Clayton, North Carolina
Good

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Mazda CX-3 L4-2.0L - Oil Change - Sunnyvale, California
Pardeep is awesome! I am very satisfied with the service I received.

Excellent Rating

(4,896)

Rating Summary
4,605
154
37
19
81
4,605
154
37
19
81
Number of Mazda services completed
53856+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

What Causes Leakage in the Shock Absorbers?
Every car, truck, and utility vehicle sold today has at least one shock absorber (informally known as a shock) for each of its...
A Buyer’s Guide to the 2012 BMW ActiveHybrid 5
In In 2012, BMW brought out the turbocharged 3.0 liter engine ActiveHybrid 5. The ActiveHybrid 5 is a real wheel, four door sedan that holds five passengers. Key Features Key features of the ActiveHybrid include the 3.0 liter inline six...
How Long Does a Thermostatic Vacuum Sensor Last?
Winter Winter can make for tricky driving conditions - just starting up your vehicle can be a bit more of a chore. When the engine is cold, it takes a few minutes before it reaches optimal temperature and you should...

How do you mute a call using the HandsFreeLink?

You can easily mute a call on the HandsFreeLink® (HFL) system built into your Accord. This is a handy feature if you need to speak with one of your passengers, but don’t want the person on the call to be...

Code p0140 we replaced 02 sensor and catalatyic converter

The vehicle should have an original equipment HO2S not aftermarket generic. For a P0140 code (https://www.yourmechanic.com/article/p0140-obd-ii-trouble-code-o2-sensor-circuit-no-activity-detected-bank-1-sensor-2-by-jay-safford), the wiring harness should be closely inspected for damage: chafing, pinches, melting, or water intrusion into connector. Exhaust leaks upstream of the HO2S must...

bought a brand new starter brand new starter solenoid truck does not want start and I have no power on the inside of my vehicle

To determine if the engine is seized, simply attempt to turn the crankshaft pulley bolt clockwise and the crankshaft should rotate. If the spark plugs are all removed, the crankshaft will turn with relatively little resistance. Of course, if the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com