Mazda CX-3 Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Mazda CX-3 Camshaft Position Sensor Replacement is $163 with $23 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mazda CX-3L4-2.0LService typeCamshaft Position Sensor ReplacementEstimate$200.66Shop/Dealer Price$215.68 - $252.62
Show example Mazda CX-3 Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(13)

Rating Summary
12
0
1
0
0
12
0
1
0
0

Luis

5 years of experience
302 reviews
Luis
5 years of experience
Mazda CX-3 L4-2.0L - Brake Pads Replacement (Front) - Richmond, Virginia


Jason

33 years of experience
617 reviews
Jason
33 years of experience
Mazda CX-3 L4-2.0L - Oil Change - Redwood City, California
Great service. On time, efficient, and friendly.

Jose

10 years of experience
63 reviews
Jose
10 years of experience
Mazda CX-3 L4-2.0L - Brake Pads Replacement (Rear) - Redwood City, California
Jose noticed that I was asking to replace break pads that didn't really need replacing. I though I needed to replace all 4 tires, but it turns out only the rear really needed replacing. He informed me and saved me money.

Andy

5 years of experience
27 reviews
Andy
5 years of experience
Mazda CX-3 L4-2.0L - Check Engine Light is on - Houston, Texas
Very professional, polite, & knowledgeable

Excellent Rating

(13)

Rating Summary
12
0
1
0
0
12
0
1
0
0
Number of Mazda CX-3 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Replace a Crankshaft Position Sensor
The crankshaft position sensor, along with the camshaft sensor, helps the vehicle determine top dead center, among other engine management tasks.
How to Buy a Good Quality Cylinder Head
The The cylinder head is one of the single most critical parts of your car’s mechanics, and one part that can trigger the most engine damage if it becomes compromised. The cylinder head, along with the head gasket, sits on...
Symptoms of a Bad or Failing Low Water Sensor
If your car has low coolant without a warning, the Coolant Light comes on for no reason, or the car is overheating, replace the low water sensor.

Car takes 2-3 tries before starting

A few different things can cause the vehicle to have camshaft sensor codes. The most common would be the failure with the camshaft sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-camshaft-position-sensor), timing chain damage (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-chain), improper timing, or a wiring issue. The Check Engine Light should...

The car is not accelerating right and the speedometer is jumping.

Hello. The speed info goes from the VSS (vehicle speed sensor (transmission output sensor)) mounted on the tranny, to the PCM (powertrain control module (computer)) mounted on the passenger firewall, to the dash speedometer. If the speedometer is not functioning...

PCV valve and scheduled maintenance

Any time an engine has been neglected like this you should not hesitate to do any repairs to start to get the vehicle back on it's scheduled maintenance. You should have the PCV changed and change the oil and filter...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com