Mazda B2500 Exhaust Gas Recirculation (EGR) Tube Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Exhaust Gas Recirculation (EGR) Tube Replacement Service

How much does a Exhaust Gas Recirculation (EGR) Tube Replacement cost?

On average, the cost for a Mazda B2500 Exhaust Gas Recirculation (EGR) Tube Replacement is $247 with $152 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mazda B2500L4-2.5LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$418.27Shop/Dealer Price$504.09 - $739.05
2000 Mazda B2500L4-2.5LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$398.27Shop/Dealer Price$484.11 - $719.08
2001 Mazda B2500L4-2.5LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$398.27Shop/Dealer Price$484.11 - $719.08
1998 Mazda B2500L4-2.5LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$398.27Shop/Dealer Price$484.09 - $719.04
Show example Mazda B2500 Exhaust Gas Recirculation (EGR) Tube Replacement prices

What is the Exhaust Gas Recirculation (EGR) Tube all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates a portion of the gasses coming out of the engine by putting them back into the intake manifold, where the engine can burn them again, reducing emissions.

Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will most likely not pass an emissions test.

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not clogged.
  • Remove and replace the EGR valve and gasket.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This should clean out any sludge or carbon build-up in the air intake system. Always keep up with the regular oil changes; it will help prevent sludge build-up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation (EGR) Tube?

  • Check Engine light is on.
  • Engine rattles during acceleration.
  • Engine has trouble idling.

How important is this service?

Your engine is not as efficient as it can be, which is why you have an EGR valve. The EGR valve takes a portion of the gas that your engine is excreting, and recirculates it through the intake manifold. The intake manifold then sends the gas back to the engine, where it is used again to power your vehicle. The tube is a key part of the EGR valve, and when the tube fails, the EGR valve will fail to do its job. As a result, your vehicle will not recirculate or recycle any of the excess gas from the engine, and you will get worse gas mileage and possibly fail emissions standards.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0

David

10 years of experience
193 reviews
David
10 years of experience
Mazda B2500 L4-2.5L - Wheel Bearings Replacement (Driver Side Front) - Langhorne, Pennsylvania
First time I used this service. Was really happy with the price and efficiency.

Carlo

14 years of experience
80 reviews
Carlo
14 years of experience
Mazda B2500 L4-2.5L - Oil Change - Austin, Texas

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Mazda B2500 L4-2.5L - Timing Belt - Spring, Texas
Very nice man, very considerate.

Alex

15 years of experience
89 reviews
Alex
15 years of experience
Mazda B2500 L4-2.5L - Oil Change - Round Rock, Texas
Great job by Alex and easy experience. Very convenient. He was quick, in time and communicated with.me about my car. Much better than the repair shop.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0
Number of Mazda B2500 services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Purchase an Austin Healey
The Austin Healey is a small British roadster that has a very large following among collectors. The cars are made up of just a handful of parts, and are a great choice for those just venturing into the world of...
How to Replace a Power Steering Belt
Common signs of a failing power steering belt include a squealing noise and visible cracks, cuts, or nicks on the serpentine or drive belt.
How to Remove a Stuck Cylinder Head Bolt
Head bolts on the cylinder get stuck and must be removed using a breaker bar, applying impact force, or by carefully drilling the bolt out.

How do I change the Bluetooth passkey?

Your car’s Bluetooth connectivity lets you use the hands-free calling system, stream music and more. However, you’ll need to pair your device with the system first. While some phones and other devices are automatically recognized, not all are. In these...

Radiator leak.

The radiator for the Tahoe has two plastic side tanks where all connections to hoses and reservoir tank are made. This radiator is not repairable and will have to be replaced if the radiator is deemed faulty. A pressure test...

I noticed my starter sounds like it's having trouble catching the engine. is it the starter or just the solenoid?

Hi Karla. Thanks for contacting us tonight. If the starter solenoid has been changed before the actual starter has been, it's likely that the starter is what's causing the gear to have issues connecting to the flywheel. However, before you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com