Mazda 626 Car jerks forward at high speeds Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(134)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(134)

Car jerks forward at high speeds Inspection Service

How much does a Car jerks forward at high speeds Inspection cost?

On average, the cost for a Mazda 626 Car jerks forward at high speeds Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mazda 626L4-2.2LService typeCar jerks forward at high speeds InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2000 Mazda 626L4-2.0LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1981 Mazda 626L4-2.0LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1987 Mazda 626L4-2.0L TurboService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 Mazda 626V6-2.5LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1989 Mazda 626L4-2.2LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Mazda 626L4-2.2LService typeCar jerks forward at high speeds InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2002 Mazda 626V6-2.5LService typeCar jerks forward at high speeds InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda 626 Car jerks forward at high speeds Inspection prices

When traveling at high speed, it can be particularly unsettling when your vehicle starts to jerk or surge forward without warning. Jerking or surging can be a sign of a number of different issues, each with its own ease and cost of repair. Specificity with regards to the handling of the vehicle at higher speeds, throttle responsiveness, and unusual noises, can help a mechanic better identify your vehicle’s specific problem.

How this system works:

When a vehicle receives an inconsistent or unbalanced flow of air and fuel, it will not run properly. An indication that a vehicle is not receiving the right mixture of air and fuel is if the vehicle jerks or surges forward at high speed. Several components of the fuel or air intake system could cause this jerking or surging sensation to happen. Issues within these systems can also cause fuel economy to worsen.

Common reasons for this to happen:

  • Failing Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so the right amount of fuel can be delivered from the fuel injectors. When a mass airflow sensor begins to fail, it will typically generate an error code that triggers the Check Engine light. This warning may be accompanied by an unexpected jerking or surging sensation while driving at high speed. A vehicle with a failing mass airflow sensor may also stall soon after starting.

  • Engine Vacuum Leak: Your engine uses vacuum lines to help the computer calculate the necessary position of the fuel injectors, ensuring an appropriate fuel/air mixture. A vacuum leak may cause the engine to run inefficiently and the computer to generate an error code. A vehicle suffering from a vacuum leak may jerk while at high speed and may also struggle to idle.

  • Fuel Pump Malfunction: A vehicle’s fuel pump is responsible for moving gasoline from the fuel tank to the engine where it can be mixed with oxygen to run the engine. When a fuel pump begins to fail, it may struggle to consistently deliver the correct amount of the fuel to the engine. The fuel pump may dramatically increase pressure while failing, creating a jerking or surging sensation.  Your vehicle may also be sluggish and struggle while driving uphill or towing.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the sudden jerking or surging sensation. The mechanic will then provide a detailed inspection report outlining the cause of jerking sensation and the cost of any repairs that need to be made.

How it's done:

A mechanic will first check your vehicle by plugging in a code reader/scanner into the vehicle’s computer. The computer should be able to provide the mechanic with a better picture of what specific part or parts are failing.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic will check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

In order to check for a vacuum leak, the mechanic will examine the vehicle’s vacuum hoses and gasket. If he or she finds the source of the leak, the mechanic will replace the failed components and start the engine to make sure the leak has been fixed.

To check a bad fuel pump, a mechanic may have to remove the gas tank. Many modern cars have electric pumps located inside the gas tank. The mechanic will examine the fuel pump to see if it is the cause of the poor performance and jerking sensation. If it is the culprit, the mechanic will replace it and reinstall the gas tank, if necessary.

In all cases, your mechanic will make the necessary repairs and start the engine to ensure that it is now running properly. Once the repairs are completed, the mechanic can use the code reader/scanner to remove error codes and turn off the Check Engine light.

How important is this service?

A car that surges or jerks at high speed is potentially dangerous, especially in heavy traffic or in bad weather. If your vehicle jerks at high speed, you should stop driving it and have it inspected by a mechanic. Because many of the issues that would cause this jerking sensation also trigger a warning lights, being diligent and having a mechanic inspect a vehicle with a warning light can help limit potential damage and avoid more costly repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(134)

Rating Summary
121
10
2
0
1
121
10
2
0
1

Eduardo

22 years of experience
62 reviews
Eduardo
22 years of experience
Mazda 626 L4-2.0L - Brake Shoes (Rear) - Richmond, Virginia
He knows his stuff and very professional in the field.

Alfred

31 years of experience
86 reviews
Alfred
31 years of experience
Mazda 626 L4-2.0L - Car is overheating - San Diego, California
Everything went as well as possible when Al provided service for our Mazda. We would definitely request him again when we have a car maintenance need.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Mazda 626 L4-2.0L - Battery - Gilbert, Arizona
YOur Mechanic is a great car service to entrust. The mechanic that was sent out to diagnosis my car was very knowledgeable and consistent. He did a complete thorough diagnosis on the car and was not satisfied until he came to the underlying problem with the car. He also answered questions that was not related to the diagnosis. Pete was straightforward with analysis he did not cover up anything. He also gave some great advice. Thanks Pete Job Well Done.

Mohammed

9 years of experience
152 reviews
Mohammed
9 years of experience
Mazda 626 V6-2.5L - Ignition Cable (Spark plug wires) - Raleigh, North Carolina
Good worker

Excellent Rating

(134)

Rating Summary
121
10
2
0
1
121
10
2
0
1
Number of Mazda 626 services completed
1474+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Pump O-Ring
Common signs include a low level of engine oil, leaking oil covering other parts of the engine, and puddles of oil under the car.
P0385 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit Malfunction
P0385 means the crankshaft position sensor B circuit is malfunctioning
P0960 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit/Open
P0960 P0960 code definition The P0960 code is a generic powertrain code related to the transmission, including pressure faults and sensor failures. In this case, the engine control module (ECM) has received a signal noting that the pressure control solenoid...

Where is the auxiliary jack located?

Your audio system is pretty advanced, even if your car doesn’t have the multi-information display. It’s capable of playing music from another source – all you have to do is connect the other device with a cable to the auxiliary...

Maintenance light on

The maintenance light is designed to come on at certain intervals to remind you to service the car. If the car was serviced recently, sometimes they forget to reset the light. To reset it: turn the ignition on with the...

Warning lights after ABS brake flex lines replaced

The rear lights, including the brake lights, all go through the light control module and should have nothing to do with the ABS system. You may have bad bulbs (https://www.yourmechanic.com/services/brake-light-bulb-replacement). Have them checked to see if one or more brake...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com