Lexus LS500 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(298)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Lexus LS500 Car Battery Replacement is $335 with $195 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Lexus LS500V6-3.4L TurboService typeCar Battery ReplacementEstimate$640.99Shop/Dealer Price$766.60 - $1139.24
2019 Lexus LS500V6-3.4L TurboService typeCar Battery ReplacementEstimate$640.99Shop/Dealer Price$766.60 - $1139.24
2020 Lexus LS500V6-3.4L TurboService typeCar Battery ReplacementEstimate$640.99Shop/Dealer Price$768.07 - $1141.82
2018 Lexus LS500V6-3.4L TurboService typeCar Battery ReplacementEstimate$640.99Shop/Dealer Price$766.74 - $1139.49
2023 Lexus LS500V6-3.4L TurboService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.85 - $1349.24
Show example Lexus LS500 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(298)

Rating Summary
291
5
0
1
1
291
5
0
1
1

Robert

22 years of experience
64 reviews
Robert
22 years of experience
Lexus IS250 V6-2.5L - Battery - Seattle, Washington
Robert was professional, thorough, and overall awesome. He called prior to arrival to make sure I was available and let me know what he was doing prior to working on my car.

James

42 years of experience
117 reviews
James
42 years of experience
Lexus ES300 V6-3.0L - Battery - Cleveland, Ohio
Very knowledgeable, efficient and on time. A great service!

Angel

6 years of experience
237 reviews
Angel
6 years of experience
Lexus LS460 V8-4.6L - Battery - Upper Marlboro, Maryland
Quick and efficient

Cesar

10 years of experience
292 reviews
Cesar
10 years of experience
Lexus GS300 V6-3.0L - Battery - Seattle, Washington
Did a great job in a timely manner.

Excellent Rating

(298)

Rating Summary
291
5
0
1
1
291
5
0
1
1
Number of Lexus Car Battery Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Use Your Car Warranty Successfully
Overtime, Overtime, car maintenance is required on all vehicles, and having a good warranty can come in handy when your car needs some replacement parts or service. Most warranties cover a number of different repairs within a certain timeframe after...
B1394 OBD-II Trouble Code: Power Door Memory Lock Relay Circuit Short to Battery
B1394 means there is an error with the power door memory lock relay circuit, likely due to damaged wires or electrical component, or a faulty circuit.
P2093 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit High Bank 2
P2093 P2093 code definition The P2093 code is a general OBD-II diagnostic trouble code indicating a fault with the “A” camshaft position actuator control circuit high bank 2. What the P2093 code means The camshaft position sensor “A” is indicating...

Rough idling, hard shifting and shuddering at the highway

Thanks for writing in about your 2002 Isuzu Trooper. The rough idle may be due to the fuel injection system being dirty or having an engine vacuum leak causing a lean condition. The hard shifting and shuttering with the chirping...

What are the signs my Timing Chain needs to be replaced?

Hi there. The noise that you are hearing could be either the timing chain or the variable valve timing solenoids. If the sound is constant and rattles easy and does not bog down the engine, then the timing chain is...

When I turn to the right no matter how fast im going i hear and feel a popping noise in the steering column, not the front of car. 2003 Toyota Avalon

Hello - this is a bit unusual, although there is at least one flexible steering coupling (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-flex-coupling-steering-damper) in the column that could cause this behavior. And, if your car has the "telescoping steering wheel" option (the steering wheel can be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com