Land Rover LR2 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(98)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(98)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Land Rover LR2 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Land Rover LR2L6-3.2LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2014 Land Rover LR2L4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2012 Land Rover LR2L6-3.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2008 Land Rover LR2L6-3.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2013 Land Rover LR2L4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2011 Land Rover LR2L6-3.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2015 Land Rover LR2L4-2.0L TurboService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2010 Land Rover LR2L6-3.2LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Land Rover LR2 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(98)

Rating Summary
91
7
0
0
0
91
7
0
0
0

Travis

10 years of experience
158 reviews
Travis
10 years of experience
Land Rover LR2 L6-3.2L - Transmission fluid is leaking - Houston, Texas
Travis was great and went far beyond to find out what was going on with the car. A very enjoyable visit.

Christopher

20 years of experience
307 reviews
Christopher
20 years of experience
Land Rover LR2 L6-3.2L - Car is not starting - Tampa, Florida
Christopher was very thorough, friendly and knowledgeable.

Collins

12 years of experience
493 reviews
Collins
12 years of experience
Land Rover LR2 L6-3.2L - Manifold Absolute Pressure Sensor (MAP Sensor) - Atlanta, Georgia
Promptly on time. Very informative which is a plus. Finished the job quickly.

Robert

21 years of experience
71 reviews
Robert
21 years of experience
Land Rover LR2 L6-3.2L - Differential / Gear Oil Replacement (Front, Rear) - Oakley, California
Excellent customer service and attention to detail. Highly recommend Robert is very knowledgeable.

Excellent Rating

(98)

Rating Summary
91
7
0
0
0
91
7
0
0
0
Number of Land Rover LR2 services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

P0028 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit Range/Performance (Bank 2)
P0028 P0028 trouble code definition Intake Valve Control Solenoid Circuit Range/Performance (Bank 2) What the P0028 code means P0028 is the OBD-II generic code indicating the engine control module (ECM) has determined that the variable valve lift for the intake...
The Guide to Legal Car Modifications in Utah
ARENA Creative / Shutterstock.com Whether you live in or plan to move to Utah and you have a modified vehicle, you need to make sure that it conforms to the laws throughout the state. The following information...
5 Best Ridesharing Apps
Get where you need to go with the short wait times and affordable prices of these amazing rideshare apps.

What are toggle switches and how are they used in cars?

Toggle switches are a simple type of electrical switch that is manually operated by the user using a short handle or lever. When the user presses the short handle forward or backwards the switch is moved between positions. When the...

vehicle won't turn on or start.

Hi there. Check the battery and see if it has a full charge. If the battery has a full charge of 12.6 volts, then put a load tester on the battery and check to see if the battery will hold...

Van cranks but wont start

If the starter motor is turning the engine over rapidly, at sufficient RPM, but the engine does not catch and run, that means that there is an ignition, fuel, air induction, or mechanical fault in the engine that will have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com