Kia Niro Battery is dead Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Battery is dead Inspection Service

How much does a Battery is dead Inspection cost?

On average, the cost for a Kia Niro Battery is dead Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Kia NiroL4-1.6L HybridService typeBattery is dead InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2020 Kia NiroL4-1.6L HybridService typeBattery is dead InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Kia NiroL4-1.6L HybridService typeBattery is dead InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Kia NiroL4-1.6L HybridService typeBattery is dead InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2018 Kia NiroL4-1.6L HybridService typeBattery is dead InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example Kia Niro Battery is dead Inspection prices

While your engine is mechanical, it needs electricity to operate. Electric spark is used to ignite fuel in the combustion chamber, turning the engine over. While the alternator provides the electricity necessary to run the car during operation, the battery is responsible for cranking the car. If your battery is dead, then the car won’t start and you’re essentially dead in the water.

How this system works:

Car batteries are crucial things – they’re responsible for providing the charge to turn over the ignition and crank the engine. Batteries operate based on a chemical reaction – acid and lead in the battery create a chemical reaction, which is then turned into an electric charge and stored in charging plates within the battery itself.

When you turn the ignition switch, several things happen, but all of them require voltage from the battery. When the ignition is switched to on, electricity is sent to the main relay, and from there to the fuel pump (which sends gasoline to the engine for ignition), and the car’s computer. The battery also produces electricity to feed the spark plugs, which ignite the fuel, and turn your car’s starter, which is responsible for actually turning the engine over and essentially jump-starting the combustion process. If your battery is dead, none of those things will happen. Depending on the amount of “juice” left in the battery, you may have just enough power to turn on a few dash lights, or you may not even have enough for that.

Common reasons for this to happen:

  • Dead Battery: Batteries have a finite lifespan. Most last five years or so, while other batteries are heavy-duty and rated for more than this. All will eventually die and need to be replaced. This is a normal part of vehicle maintenance, and your battery, starter and alternator should be tested regularly to ensure that you’re not stuck on the side of the road with a dead battery.

  • Car Lights Left On: With the advent of smarter automotive technology, this has become rarer, but it still occurs. If your car’s lights don’t have an automatic shutoff feature, they’ll stay on unless you physically turn them off. If this happens and the engine isn’t running, they’ll pull power straight from the battery, eventually killing it.

  • Door Not Fully Closed: If your door is open, then the dome light will be on, and other interior lights may also be on. These lights draw their power from the battery if the engine isn’t running, and can quickly drain a battery.

  • Dead Alternator: The alternator produces electricity while the engine is running, and is responsible for providing all the power needed for your engine, your accessories, and to recharge the battery. If the alternator dies, it won’t charge the battery, and all the power needs of your vehicle will come straight from the battery. Eventually, this will drain it completely, leaving you stranded.

  • Bad Starter: It might not be the battery that’s the problem – if your starter has turned its last, your car won’t crank either. Again, regular maintenance can help predict starter failure.

  • Failed Main Relay: Sometimes, everything in the charging system is perfectly fine, but your car still won’t crank. In this instance, the first suspect should be the main relay, since it controls the fuel pump and the car’s computer.

What to expect:

A top-rated mobile mechanic will come to your home or office to check the condition of your battery, starter, alternator and other important components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first check the charge on your battery to determine if it is actually dead (bad cell), or if it only needs to be recharged. A jump-start may be all that is required. The mechanic will also check the alternator, starter and other important components to ensure that you can get back on the road safely.

How important is this service?

If your battery is dead, you’re going nowhere fast. The best protection against this is to have your battery, starter and alternator inspected regularly. However, if you’ve been stranded with a dead battery, one of our professional mechanics can help.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Brian

13 years of experience
1 reviews
Brian
13 years of experience
Kia Niro L4-1.6L Hybrid - Exterior Door Handle Replacement (Passenger Side Front, Passenger Side Rear) - Annapolis, Maryland
Prompt, Friendly, helpful, knowledgeable!

James

5 years of experience
15 reviews
James
5 years of experience
Kia Niro L4-1.6L Hybrid - Brake Pads Replacement (Front) - Woodstock, Georgia
Very knowledgeable and honest. Would definitely use again.

Walter

46 years of experience
345 reviews
Walter
46 years of experience
Kia Niro L4-1.6L Hybrid - Rear Windshield Wiper Blade - Broken Arrow, Oklahoma
Walter is very knowledgeable and detailed.

Jim

33 years of experience
187 reviews
Jim
33 years of experience
Kia Niro L4-1.6L Hybrid - Pre-purchase Car Inspection - Dublin, California
Very easy to talk to and good at explaining the big picture in his review of a used car that I was considering buying.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Kia Niro services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Register a Car in Virginia
There There are so many different things that have to be handled when moving to Virginia. Making sure that you take the steps needed to get a car registered in this state should be at the top of your list...
P0483 OBD-II Trouble Code: Cooling Fan Rationality Check Malfunction
P0483 code means that the cooling fan has been commanded to turn on or off, but the voltage reading indicates that the fan did not respond.
P1103 OBD-II Trouble Code: Mass Airflow Sensor in Range But Higher Than Expected
P1103 means there is an issue with the mass airflow sensor, likely due to faulty or loose wiring and connectors in the sensor, or an air leak.

rpm's cutting engine power

Hello. This is normal for this truck. Due to the design of the control systems and the variable valve timing, the computer will attempt to adjust everything during this type of maneuver. Using an aftermarket computer programmer (https://www.yourmechanic.com/article/how-to-make-your-car-perform-better-by-robert-tomashek) can make...

Have e320 2000 Mercedes Benz getting code p1491 and check engine light on.

This code is related to the pressure in the AC system and suggests that it is too high. When this happens it is usually a result of some kind of blockage in the system. There is also a pressure sensor...

Jerking reaction when accelerating

This may be a sign of a dirty or failing mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com