Jeep Wrangler JK Window Motor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Window Motor Replacement Service

How much does a Window Motor Replacement cost?

On average, the cost for a Jeep Wrangler JK Window Motor Replacement is $262 with $122 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep Wrangler JKV6-3.6LService typeWindow Motor - Passenger Side Rear ReplacementEstimate$494.96Shop/Dealer Price$583.55 - $841.22
2018 Jeep Wrangler JKV6-3.6LService typeWindow Motor - Driver Side Rear ReplacementEstimate$389.85Shop/Dealer Price$452.65 - $636.92
2018 Jeep Wrangler JKV6-3.6LService typeWindow Motor - Passenger Side Front ReplacementEstimate$485.95Shop/Dealer Price$572.80 - $829.16
2018 Jeep Wrangler JKV6-3.6LService typeWindow Motor - Driver Side Front ReplacementEstimate$389.85Shop/Dealer Price$452.67 - $636.96
Show example Jeep Wrangler JK Window Motor Replacement prices

What is the Window Motor all about?

The window motor is located inside the door panel behind the trim, and is responsible for raising and lowering the window when the switch is pressed. It is a reversible electric motor, powered up by an electric switch on the inside of the door. When the button to open or close the window is pressed, a circuit completes and the electric window motor cycles. The window glass is attached to a track and is on a window regulator that allow it to move squarely and smoothly up and down. If the window motor is faulty, you may experience a slow-moving window especially upward, the window may not move at all when the button is pressed, or the window may begin to sink back into the door after the power window switch is released.

Keep in mind:

  • The window motor is a sealed unit, and is not designed to need maintenance or service.
  • A window motor is located inside each door equipped with a power window. Accessing and repairing a power window motor is best left to one of our expert technicians.

How it's done:

  • Identify which window motor has failed.
  • Remove door panel to gain access.
  • Remove and replace faulty window motor and regulator.
  • Check operation of the window regulator and motor.
  • Reinstall door panel.

Our recommendation:

Because the window motor is a sealed system, it does not receive any scheduled maintenance. When it fails, replacement is the only option. However, there are other potential causes of malfunctions, including the window switch and wiring problems. If you’ve noticed that your window motor is not working properly, or it is working inconsistently, have the problem diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Window Motor?

  • Window does not roll up or down
  • Window rolls down but not up
  • Window does not hold its position
  • Window slows or stalls out when rolling up the window

How important is this service?

The power window motor closes your door windows to provide security for belongings inside, and provides protection from environmental elements. A window must be able to open in the event of an emergency, so have a faulty window motor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Michael

19 years of experience
50 reviews
Michael
19 years of experience
Jeep Wrangler JK V6-3.6L - Radiator - Rockville, Maryland
Great experience, Michael was very professional and showed up early. He was also extremely knowledgeable and very accommodating.

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Teterboro, New Jersey
Elias has worked on my car twice, always professional, shows up on time, and does great work.

Jesus

8 years of experience
33 reviews
Jesus
8 years of experience
Jeep Wrangler JK V6-3.6L - Oil Change - Coronado, California
ON Time, Professional, Clean , Service Oriented,

Roberto

13 years of experience
354 reviews
Roberto
13 years of experience
Jeep Wrangler JK V6-3.6L - Car is not starting - Houston, Texas
Great

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Jeep Wrangler JK services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Arizona
Driving Driving on the Arizona is a privilege and most people treat it as such. In order to pay for the beautiful roadways in Arizona, citizens will have to pay to keep their cars registered with the DMV. Either every...
How to Tune and Adjust Your Carburetor
While all modern cars use computer-controlled fuel distribution systems, there are still many vehicles on the road that employ the traditional carbureted method of...
5 Benefits of Waxing Your Car
Waxing your car regularly not only keeps it shiny — it also protects the exterior from damages and saves you money.

Is leaking water but the thermostat the water pump and the heater core is good but it's slowly dripping water onto the ground

Based on your description, you may have a small leak somewhere in the connections to your radiator, water pump or to your engine. Often times water leaks start out small and develop over time increasing and decreasing depending on the...

engine wont restart when hot, no spark P0340 has 12v on both connectors, freq from 5-11hz when cranking

Since the crank position sensor gets its timing signal off the damper, I would first replace the damper to be sure timing was correct. The fact that this failure occurs after a "heat soak" cycle, and the P0340 code is...

I put my mercedes into drive and it won't move, reverse is fine..

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com