Jeep Grand Wagoneer L Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Jeep Grand Wagoneer L Engine is sputtering Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2023 Jeep Grand Wagoneer LL6-3.0L TurboService typeEngine is sputtering InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2024 Jeep Grand Wagoneer LL6-3.0L TurboService typeEngine is sputtering InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
Show example Jeep Grand Wagoneer L Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
Jeep Renegade L4-2.4L - Engine is sputtering - Golden, Colorado
Quick and efficient service! He talked ya through the issue and solution and was very easy to work with. 10/10 would recommend him

Nathan

22 years of experience
298 reviews
Nathan
22 years of experience
Jeep Commander V6-3.7L - Engine is sputtering - Austin, Texas
Very informative and great customer service.

David

29 years of experience
142 reviews
David
29 years of experience
Jeep Grand Cherokee V8-4.7L - Engine is sputtering - San Diego, California
Excellent service! Friendly, honest and efficient!

Jonathan

14 years of experience
171 reviews
Jonathan
14 years of experience
Jeep Patriot L4-2.4L - Engine is sputtering - North Kingstown, Rhode Island
Very knowledgeable and figured out what needed to be done with my hesitation. Sounds like the transmission and is probably not worth fixing at this time

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Jeep Engine is sputtering Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P2038 OBD-II Trouble Code: Reductant Inj Air Press Sensor Circ Range/Performance
The The P2038 code is a general OBD-II diagnostic trouble code that points to a fault with the reductant injection air pressure sensor “A” circuit range / performance. What the P2038 code means The reductant injection system adds air or...
P2178 OBD-II Trouble Code: System Too Rich Off Idle Bank 1
What What the P2178 code means? P2178 is an OBD-II generic code for the engine control module (ECM) detecting the fuel control has reached it specification limits for short and long fuel trim when the engine is just off idle...
The Guide To Colored Curb Zones in Washington
Washington Washington parking laws: understanding the basics Drivers in Washington are responsible for making sure that their vehicles are not hazards when they are driving on the roads, as well as when they are parked. Whenever you park, you need...

Battery keeps dying out

Hello. Typically when these symptoms occur with the security light on, it is always the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) that is causing this. It can also be a short in the electrical system, but most of the time, it is caused...

My car's engine is overheating, what could be the cause?

An overheating engine can be caused by several components. A new thermostat is a great place to start, and knowing that it is not the problem we can focus elsewhere. If the thermostat was suspected, then you may have another...

Engine cranks but has trouble starting only when it's cold outside.

When the problem is happening you should turn the key to the run position to see if theft light comes on and then goes out. If the system keeps the theft light on then you most likely have a bad...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com