Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.
How A Diagnostic Works
Instantly book a certified mobile mechanic to come to you
Mechanic diagnoses the problem and quotes necessary repairs
Your vehicle is ready to go
Fair, upfront & transparent pricing for all services
Our certified mobile mechanics can come to you now.
On average, the cost for a Jeep Gladiator Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 1968 Jeep GladiatorL6-3.8L | Service typeTransfer case fluid is dirty Inspection | Estimate$114.99 | Shop/Dealer Price$124.99 - $132.49 |
| 1965 Jeep GladiatorV8-5.3L | Service typeTransfer case fluid is dirty Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1966 Jeep GladiatorL6-3.8L | Service typeTransfer case fluid is dirty Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1962 Jeep GladiatorL6-3.8L | Service typeTransfer case fluid is dirty Inspection | Estimate$94.99 | Shop/Dealer Price$104.99 - $112.48 |
| 2022 Jeep GladiatorV6-3.0L Turbo Diesel | Service typeTransfer case fluid is dirty Inspection | Estimate$94.99 | Shop/Dealer Price$105.02 - $112.55 |
| 1969 Jeep GladiatorV8-5.3L | Service typeTransfer case fluid is dirty Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 2020 Jeep GladiatorV6-3.6L | Service typeTransfer case fluid is dirty Inspection | Estimate$99.99 | Shop/Dealer Price$109.87 - $117.28 |
| 1965 Jeep GladiatorL6-3.8L | Service typeTransfer case fluid is dirty Inspection | Estimate$99.99 | Shop/Dealer Price$110.24 - $117.94 |
A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.
In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.
Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.
Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.
A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.
A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.
By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Jeep owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
