logo

Jeep Compass Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(20)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Jeep Compass Car Battery Replacement is $302 with $162 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Jeep CompassL4-2.0LService typeCar Battery ReplacementEstimate$479.76Shop/Dealer Price$564.55 - $810.82
2009 Jeep CompassL4-2.4LService typeCar Battery ReplacementEstimate$470.75Shop/Dealer Price$553.77 - $798.72
2014 Jeep CompassL4-2.4LService typeCar Battery ReplacementEstimate$470.75Shop/Dealer Price$553.80 - $798.76
2008 Jeep CompassL4-2.0LService typeCar Battery ReplacementEstimate$470.75Shop/Dealer Price$553.80 - $798.76
2016 Jeep CompassL4-2.4LService typeCar Battery ReplacementEstimate$470.75Shop/Dealer Price$555.27 - $801.34
2018 Jeep CompassL4-2.4LService typeCar Battery ReplacementEstimate$650.19Shop/Dealer Price$778.24 - $1157.89
2016 Jeep CompassL4-2.0LService typeCar Battery ReplacementEstimate$470.75Shop/Dealer Price$553.81 - $798.79
2021 Jeep CompassL4-2.4LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$804.57 - $1200.00
Show example Jeep Compass Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Jeep Compass Car Battery Replacement services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(20)
Rating Summary
19
0
0
0
1
19
0
0
0
1

Excellent Rating

(20)
Rating Summary
19
0
0
0
1
19
0
0
0
1
Number of Jeep Compass Car Battery Replacement services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

The Guide to Cracked Windshield Laws in All States
It It goes without saying that a driver needs to be able to see well in order to drive safely. Because of this, there are certain laws and rules that govern the quality that a vehicle’s windshield must be in....
Read more
P2405 OBD-II Trouble Code: EVAP Leak Detection Pump Control Circuit Low
P2405 code definition Evaporative Emission Control System (EVAP) Leak Detection Pump Control Circuit Low What the P2405 code means P2405 is an OBD-II generic code for the Engine Control Module (ECM) detecting that the evaporative system leak detection...
Read more
What Are the Risks of Switching to Synthetic Oil in Older Cars?
Older cars usually have to use conventional motor oil instead of synthetic motor oil. Switching to synthetic can cause engine leaks or engine damage.
Read more

D light indicator is blinking

Hello there, when the D light is blinking on the dashboard this means there is a transmission fault. Many different issues can cause this fault. The most common would be a low transmission fluid level (https://www.yourmechanic.com/services/transmission-fluid-service), a mechanical transmission fault,...
Read more

Why would the ABS light be on if the ABS module does not see a problem or set a code?

Hi there: If the ABS warning light (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-abs-light-on) comes on while you are driving, it means the ABS is not working properly. Your normal brakes will work, but the anti-lock brakes will not. If the light remains on, you need...
Read more

False "open rear access door open" msg. And lights aren't coming on inside when rear door really does open? Can this be reset

Hi Jasmine. Thanks for contacting us today. In most cases, this error message is activated when there is a failure of the rear door sensor. Sometimes an exposed electrical wire that is connected to the sensor can cause this to...
Read more
  1. Home
  2. Estimates
  3. Jeep
  4. Compass
  5. Car Battery Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE