Isuzu i-280 Clutch fluid is contaminated Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(313)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(313)

Clutch fluid is contaminated Inspection Service

How much does a Clutch fluid is contaminated Inspection cost?

On average, the cost for a Isuzu i-280 Clutch fluid is contaminated Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-280L4-2.8LService typeClutch fluid is contaminated InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Isuzu i-280 Clutch fluid is contaminated Inspection prices

Clutch fluid is the lifeblood of the clutch system. Without clutch fluid, it will be impossible to engage the clutch and major components of the clutch assembly can be damaged. Over time, clutch fluid can become contaminated or dirty and will need to be replaced.

How this system works:

Clutch fluid is actually brake fluid but without it the clutch would not function. Clutch fluid is stored in the clutch master cylinder and when the clutch pedal is depressed the fluid moves to the slave cylinder where the pressure moves the clutch, which would not move with the increased pressure.

If the master cylinder is low on fluid or there is a leak there will not be enough pressure to engage the clutch. Contaminated fluid can cause damage to both the slave and master cylinder.

Common reasons for this to happen:

  • Failing External Dust Boot: Clutches have a number of rubber parts that tend to fail. A ruptured or hardened clutch dust boot will allow dirt and moisture to gain access to the cylinder bore outlet and contaminate the fluid. The dust boot should be inspected on a regular basis to ensure that it is not failing.

  • Failing Seal or Valve: The clutch cylinders have valve seals and if they fail it prevents the master cylinder from raising the proper pressure when the pedal is depressed. Once a seal fails it allows fluid to leak out and contaminates to enter the system.

  • Clutch Fluid Leak: A leak in the clutch fluid system can lead to contaminated fluid. Water, dirt and even oil can end up in the system. A fluid leak will also make the vehicle hard to shift. The clutch pedal may go all the way down to the floor if the clutch fluid level is low.

  • Clutch Fluid Needs to be Changed: Like all fluids, over time they pick up contaminants and become dirty. Clutch fluid needs to be replaced on a regular basis, usually at least once a year. If the system is losing clutch fluid on a regular basis the entire system should be inspected for leaks.

  • Poorly Done Repair: A poorly done clutch repair or service can result in containments such as oil or water entering the system. A professional mechanic should do clutch work.

What to expect:

A top­ rated mobile mechanic will come to your home or office to determine the source and cause of the Contaminated Clutch Fluid issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect the car's clutch system for evidence of leaks, worn seals and other important components such as the master cylinder for damage requiring repair.

How important is this service?

Dirty or low clutch fluid levels can seriously damage the master and slave cylinders. While adding or changing out the clutch fluid is a fairly inexpensive repair, once the master or slave cylinder is damaged, the repair cost will go up dramatically. Contaminated clutch fluid should be replaced as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Car is not starting - Kennesaw, Georgia
Extremely knowledgeable and very honest!!

Corey

27 years of experience
43 reviews
Corey
27 years of experience
Isuzu i-280 L4-2.8L - Brake Light Switch - Kennesaw, Georgia
Corey did an awesome job!

James

31 years of experience
705 reviews
James
31 years of experience
Isuzu Rodeo V6-3.2L - Transmission Fluid Service - Buena Park, California
James gets the job done and provide insights on other issues that needs attention.

William

17 years of experience
95 reviews
William
17 years of experience
Isuzu Trooper V6-3.2L - Battery - Denver, Colorado
Excellent service

Excellent Rating

(313)

Rating Summary
290
13
0
2
8
290
13
0
2
8
Number of Isuzu services completed
3443+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

Is It Safe to Drive With a Bubble in Your Tire?
If you see a bubble in your car tire it's a problem. A tire with a bulge in the tread or sidewall is not safe to drive on and must be replaced.
Is it Safe to Drive With a Gas Leak?
If you notice the smell of gas once you get into your vehicle, this could be a sign of a gas leak. A...
P0726 OBD-II Trouble Code: Engine Speed Input Circuit Range/Performance
P0726 means the car's computer has received an incorrect engine speed signal often due too a failed, engine input speed sensor or transmission sensor.

Truck ran out of gas and will not start.

Hello and thanks for the question. That is a lot of good information you have shared, and its always a good idea to pass along any information that may help the mechanic. However, I would recommend having a mechanic, such...

New tension belt was put on and the car will not start. The car computer is saying the timing belt is off.

Hi there. The serpentine or drive belts have nothing to do with the timing belt on the car. It depends on the tensioner that was installed, either the drive belt tensioner or the timing belt tensioner. I recommend seeking out...

My car won't start we've replaced the alternator and fuel pump but still won't start I just want it fixed what could it be?

Check to see if there are any stored diagnostic trouble codes. Be sure you have a fully charged battery that passes a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection). Confirm that the engine immobilizer system (security system) is not activated thus preventing the car...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com