Infiniti M45 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(78)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(78)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Infiniti M45 Front Crankshaft Seal Replacement is $225 with $57 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$299.94Shop/Dealer Price$335.99 - $427.11
2007 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$289.13Shop/Dealer Price$321.46 - $409.81
2009 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$289.13Shop/Dealer Price$321.52 - $409.90
2004 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$362.12Shop/Dealer Price$396.13 - $485.73
2003 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$362.12Shop/Dealer Price$400.52 - $493.41
2006 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$289.13Shop/Dealer Price$321.81 - $410.41
2008 Infiniti M45V8-4.5LService typeFront Crankshaft Seal ReplacementEstimate$289.13Shop/Dealer Price$321.55 - $409.95
Show example Infiniti M45 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(78)

Rating Summary
74
2
0
0
2
74
2
0
0
2

Michael

26 years of experience
199 reviews
Michael
26 years of experience
Infiniti M45 V8-4.5L - Tie Rod End Replacement (Front Left Outer, Front Right Outer) - Charlotte, North Carolina
Repair done quick. Excellent job on replacing my tire rods

Victor

12 years of experience
211 reviews
Victor
12 years of experience
Infiniti M45 V8-4.5L - Valve Cover Gasket - Norfolk, Virginia
Amazing. Great person and awesome mechanic. Highly recommend this guy.

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Infiniti M45 V8-4.5L - Crankshaft Position Sensor - Nashville, Tennessee
Did a great job explaining what he did and gave suggestions on how to take care of car.

Christopher

9 years of experience
120 reviews
Christopher
9 years of experience
Infiniti M45 V8-4.5L - Car is not starting - Marietta, Georgia
Very articulate in his explanations helping the customer to easily understand his method of troubleshooting.

Excellent Rating

(78)

Rating Summary
74
2
0
0
2
74
2
0
0
2
Number of Infiniti M45 services completed
858+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

P2712 OBD-II Trouble Code: Hydraulic Power Unit Leakage Intermittent
P2712 means there is low pressure usually caused by a leak in the the hydraulic power unit or also faulty sensors & solenoids or electrical issues.
Should You Wax or Polish Your Car?
Polishing a car removes small damages done to the top coat of a car and wax provides a protective coating to keep paint jobs from fading.
The Guide To Colored Curb Zones in Georgia
Georgia Georgia parking laws: understanding the basics Drivers in the state of Georgia need to be aware of the various parking laws and regulations to ensure they do not inadvertently park in the wrong location. If you park where you...

How do you calibrate the compass in a 2012 Nissan Altima?

While your compass is designed to auto calibrate, there may be times you have to do it manually. Many things can cause the compass to lose its calibration, including power lines, strong magnets and more. Thankfully, it’s not hard to...

Code P0010- Replaced Intake Camshaft Position Actuator Solenoid and light popped on later that day... what now?

P0010 (https://www.yourmechanic.com/article/p0010-obd-ii-trouble-code-a-camshaft-position-actuator-circuit-bank-1-by-paul-lancette) can be caused by inadequate oil delivery due to engine oil sludge (the VVT system relies on hydraulic pressure), worn timing components (chains, gears, guides), malfunctions in the crankshaft or camshaft position sensors, and wiring faults. The possibility...

I have a 2015 Dodge charger 3.6. I was sitting at a Walgreens for an extended period of time while the car was in park and did not realize that my foot remained on the [brake](/topics-brake-dodge/) during this time. When I went to leave the vehicle I pushed the button to turn it off and then took my foot off of the brake. Close the door went into the store came back out and I cannot press the breakdown. in order to start the car with the push button you have to press the brake and push the button but I am unable to press the brake. I'm guessing that pushing the brake in has allowed hydraulic fluid to build up and now I have no give in the braking system. Is there some sort of release valve so that I can unscrew and allow the pressure to alleviate the system or is there another way to fix this?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com