Infiniti I35 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(100)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(100)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Infiniti I35 Car Thermostat Replacement is $259 with $119 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Infiniti I35V6-3.5LService typeCar Thermostat ReplacementEstimate$393.62Shop/Dealer Price$459.58 - $643.27
2003 Infiniti I35V6-3.5LService typeCar Thermostat ReplacementEstimate$388.65Shop/Dealer Price$452.52 - $636.93
2002 Infiniti I35V6-3.5LService typeCar Thermostat ReplacementEstimate$388.65Shop/Dealer Price$452.57 - $637.00
Show example Infiniti I35 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(100)

Rating Summary
90
5
2
1
2
90
5
2
1
2

Aaron

30 years of experience
132 reviews
Aaron
30 years of experience
Infiniti I35 V6-3.5L - Power Steering Pressure Hose - Tallahassee, Florida
Aaron did a great job, explained all that he was doing, and was very friendly too. I will use him again next time I need a mechanic.

Milton

38 years of experience
239 reviews
Milton
38 years of experience
Infiniti I35 V6-3.5L - Windshield Washer Pump Replacement (Front) - Las Vegas, Nevada
Milton was great, knew his stuff, honest and trustworthy, highly recommend.

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Infiniti I35 V6-3.5L - Starter - Kennesaw, Georgia
Awesome

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Infiniti I35 V6-3.5L - Battery Terminal Ends - Atlanta, Georgia
Great job went above and beyond to get my car cranking again thanks Tinashe

Excellent Rating

(100)

Rating Summary
90
5
2
1
2
90
5
2
1
2
Number of Infiniti I35 services completed
1100+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

How Long Does a Headlight Switch Last?
Being Being able to see at night is an important part of staying safe while on the roadways. Without properly functioning headlights, you will find it very hard to see and navigate your way around in the dark. Most car...
A Buyer’s Guide to the 2012 Volkswagen Touareg
The The 2012 Volkswagen Touareg provides an appealing combination of style, performance and drivability. This all-wheel drive SUV delivers a satisfying driving experience at a more affordable price than some of the comparable options available in its class. Key Features...
How Do Underbody Car Lights Work?
Your Your car has a number of important lights on it – headlights, turn signals, taillights, brake lights, running lights, and more. However, your options aren’t limited to what was installed by the automaker. You can install aftermarket taillights and...

How do I adjust the instrument panel brightness?

The instrument panel controls are illuminated when the headlights are on, to help you see your controls even when it is dark out. The brightness of the instrument panel controls can be adjusted with the instrument panel illumination control. The...

Rough idle, clacking noise from engine under higher load

Hi there. From the description you have provided, the vehicle you are working on needs further diagnoses. First, 100 PSI for cylinder compression is inadequate. I would look into whether valve timing is correct. An incorrectly timed camshaft (https://www.yourmechanic.com/services/timing-belt-replacement) could...

Clicking noise is much louder when accelerating. What's could that sound be?

The clicking sound may possibly be rocker arms that may need to be adjusted. When these are incorrectly adjusted or too loose, this causes a bit of play in between the rocker arm and the valve spring. As the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com