Infiniti EX37 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Infiniti EX37 Power Steering Pressure Hose Replacement is $873 with $649 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Infiniti EX37V6-3.7LService typePower Steering Pressure Hose ReplacementEstimate$1546.60Shop/Dealer Price$1881.33 - $2862.84
Show example Infiniti EX37 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Antonios

19 years of experience
56 reviews
Antonios
19 years of experience
Infiniti EX37 V6-3.7L - Brake Pads Replacement (Front, Rear) - Westwood, Massachusetts
Very professional, does not try to make you buy what you don't need. Friendly and transparent. The experience was great, everything done at home and at a price you cannot beat.

Pierre

10 years of experience
366 reviews
Pierre
10 years of experience
Infiniti EX37 V6-3.7L - Serpentine/Drive Belt - Westwood, Massachusetts
Pierre has been very helpful, courteous, and professional

James

32 years of experience
705 reviews
James
32 years of experience
Infiniti EX37 V6-3.7L - Battery - Santa Ana, California
On-time, quick, got my car working!

John

20 years of experience
138 reviews
John
20 years of experience
Infiniti G35 V6-3.5L - Power Steering Pressure Hose - Cedar Park, Texas
Very polite, thorough, and courteous. Did a great job!

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Infiniti Power Steering Pressure Hose Replacement services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

What Does the Dirty Air Filter Warning Light Mean?
The dirty air filter warning light turns on when their is reduced airflow to the engine, which affects your car's gas mileage and performance.
P0673 OBD-II Trouble Code: Cylinder 3 Glow Plug Circuit
P0673 means there are issues with a computer output circuit due to defective glow plug in cylinder 3, in a module or timer and in a relay.
P0210 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 10
P0210 P0210 code definition Injector Circuit Malfunction - Cylinder 10 What the P0210 code means P0210 will be seen when the Engine Control Module (ECM) has found a malfunction within the cylinder 10 fuel injector circuit. The ECM constantly looks...

Lights keep burning out

If the lights on your dash are going out along with other lights like your radio lights or the clock light, then you might be having a problem with the dimmer switch in your vehicle. The dimmer switch is what...

Brake, ABS, DSC, Check Engine Light - 2001 BMW 325

If you visited a smaller local repair shop or a garage chain, you may want to take the car to the dealer where they have the proper equipment to extract the fault coes from the system. These mechanics are specialized...

RPM goes down and never goes up when AC is turn on in ideal

This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, turning on AC or engaging the brakes). The Manifold Absolute Pressure (MAP) sensor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com