GMC Sierra 1500 Throttle Body Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a GMC Sierra 1500 Throttle Body Replacement is $357 with $217 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2017 GMC Sierra 1500V8-5.3L	Service typeThrottle Body Replacement	Estimate$668.66	Shop/Dealer Price$800.68 - $1188.62
2003 GMC Sierra 1500V8-6.0L	Service typeThrottle Body Replacement	Estimate$1044.01	Shop/Dealer Price$1256.48 - $1888.12
2017 GMC Sierra 1500V6-4.3L	Service typeThrottle Body Replacement	Estimate$579.47	Shop/Dealer Price$689.70 - $1016.20
2016 GMC Sierra 1500V8-5.3L	Service typeThrottle Body Replacement	Estimate$659.65	Shop/Dealer Price$789.92 - $1176.56
2013 GMC Sierra 1500V8-5.3L	Service typeThrottle Body Replacement	Estimate$968.25	Shop/Dealer Price$1177.15 - $1796.34
2008 GMC Sierra 1500V8-4.8L	Service typeThrottle Body Replacement	Estimate$813.29	Shop/Dealer Price$982.11 - $1484.09
2004 GMC Sierra 1500V8-5.3L	Service typeThrottle Body Replacement	Estimate$1044.01	Shop/Dealer Price$1256.53 - $1888.22
2015 GMC Sierra 1500V8-5.3L	Service typeThrottle Body Replacement	Estimate$659.65	Shop/Dealer Price$789.92 - $1176.56

Show example GMC Sierra 1500 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

The engine cover is removed, if necessary.
The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
The electrical connections to the throttle body are removed.
If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
All cables and electrical connections are restored. The intake air snorkel is reconnected.
If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(412)

Rating Summary

381

16

6

1

8

381

16

6

1

8

SEE REVIEWS NEAR ME

Eduardo

20 years of experience

570 reviews

Request Eduardo

Eduardo

20 years of experience

Request Eduardo

by Mitch

GMC Sierra 1500 V8-4.8L - Brake Light Switch - Conroe, Texas

Great experience and really fast. Thank you!

Kenneth

21 years of experience

870 reviews

Request Kenneth

Kenneth

21 years of experience

Request Kenneth

by Luis

GMC Sierra 1500 V8-4.8L - Car is overheating - Bell, California

Kenneth was great and gave good advise but I was disappointed because the result wasn't fix and he wasn't sure if that was the problem , to be honest I think I spent $80.00 constation I could of got that from friends , and the overheating wasn't resolved, now I have to take it garage mechanic so they can do a real diagnostics test so that they can tell me what's wrong with it , it was a waste of time and days waiting for nothing . Thank you Luis Beza

Bacle

18 years of experience

60 reviews

Bacle

18 years of experience

by Molly

GMC Sierra 1500 V8-4.8L - Battery - Menlo Park, California

Nathan

30 years of experience

260 reviews

Nathan

30 years of experience

by Jarrad

GMC Sierra 1500 V8-6.0L - Car is not starting - Broken Arrow, Oklahoma

Came out and was super quick, friendly, knowledgeable and made sure I knew exactly what he was doing and why. I would highly recommend.

Excellent Rating

(412)

Rating Summary

381

16

6

1

8

381

16

6

1

8

SEE REVIEWS NEAR ME

Recent articles & questions

How Long Does a Ball Joint Rear Last?

Common signs include clunking noises and tire wear in the rear, and you may start steering to the right or left unintentionally.

How Long Does a Trunk Striker Plate Last?

Most Most people use their trunk on a daily basis and never give a second thought to what it takes to make it function. A trunk is just like the front door of a home in regards to what it...

5 Essential Things to Know About Car Trade-Ins

Whether Whether it’s time for an upgrade or your old ride just doesn’t meet your family’s needs, you may be considering trading in your car for a new one. Before you jump right in and hand over the keys, there...

Automatic window off track

What's the best way to get bolts off of the water pump pulley

I will usually try to break the bolts free from the pulley before I remove the belt. Sometimes you can put a little extra tension on the belt by pressing on the tensioner, while using another wrench to break the...

Scraping noise

Sometimes its easy to get the hardware in a little crooked when changing brake pads, that or a backing plate might have gotten bent. Take the car back to the guy who did your brakes, they should be happy to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com