GMC Sierra 1500 Limited Rear lights are not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,948)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,948)

Rear lights are not working Inspection Service

How much does a Rear lights are not working Inspection cost?

On average, the cost for a GMC Sierra 1500 Limited Rear lights are not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 GMC Sierra 1500 LimitedV8-5.3LService typeRear lights are not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example GMC Sierra 1500 Limited Rear lights are not working Inspection prices

Rear lights or tail lights, are an important safety feature on your vehicle, especially when driving at night or in bad weather. These lights let other drivers know where you are on the road and illuminate brighter to indicate when you are braking. When rear lights fail, not only can it be dangerous for you and other drivers, it can also result in a citation from a police officer. If you notice an issue with your rear lights, you should have it inspected immediately.

How this system works:

During the day time, or when the headlights are off, rear lights only illuminate to indicate when a driver is braking. At night, or when the headlights are turned on, the rear lights illuminate constantly to let other drivers know where you are, and illuminate brighter when braking. Your rear lights are controlled through the same switch that controls the headlights. Power is channeled through a relay to the rear lights, illuminating them when the switch is engaged. A brake light switch, which is typically connected to the brake pedal, illuminates the brighter brake lights when the brake pedal is pressed.

Common reasons for this to happen:

  • Blown Fuse: As a first resort, a mechanic should expect the corresponding fuse for your rear lights. When a fuse blows, it prevents the circuit from completing, in this case preventing the rear lights from illuminating. Sometimes when a taillight lens cracks or breaks, it can allow moisture to enter the lens and cause a short circuit, blowing the fuse.

  • Burned Out Bulbs: In the case where only one of your rear lights appears to be out, the cause is most likely a burned out bulb. When the filament breaks inside a bulb, it cannot illuminate the gas inside the bulb. A burned out bulb will not affect the circuit of the entire rear light system, and the other rear light should continue to function normally.

  • Bad relay: A relay transfers power from the battery to the lights themselves, but when a relay fails, the connection is unable to be completed. A relay may also fail because it is not grounded properly. A wire that is not grounded properly is unable to protect the circuit and provide an outlet for excess charge that build up. A vehicle with a bad relay or bad ground may not be able to successfully power your rear lights.

  • Bad Brake Light Switch: If the rear lights illuminate normally but do not become brighter when braking, the brake light switch may not be functioning properly. The brake light switch circuit is completed when the brake pedal is pushed, but if the switch has been pushed out of place or is not connecting properly, the brake pedal may not be able to complete the circuit, meaning that the lights will not illuminate.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine why your tail lights have failed. The mechanic will then provide a detailed inspection report outlining the nature of the failure and the cost of any repairs that need to be made

How it's done:

When checking electric components on your vehicle, especially, fuses and relays, the mechanic will bring a multimeter which will help him or her diagnose what specific component has failed. The mechanic will begin by examining the back of the car for any superficial damage like broken tail light covers, and loose, or frayed wiring. If there is no superficial damage, the mechanic will then begin to examine the different components along the electrical circuit.

The mechanic will begin inspecting the various electrical components of the vehicle by looking at the fuses. If he or she suspects a blown fuse, they will remove the corresponding fuse for the tail lights to see if it is blown. If so, the mechanic will then replace it with a fuse appropriately rated for the amperage.

If only one of the tail lights appears to be out, the mechanic should check to see if the unlit bulb is burned out. Over time, bulbs will eventually fail and need to be replaced. The mechanic will check the filament in the unlit bulb to see if it is broken. If so, he or she will replace the bad bulb with a new one.

If the bulbs and fuses appear to be working properly, the mechanic will then check the corresponding relay for the tail lights. Using a multimeter, the mechanic can check the resistance of the relay. If it is not functioning properly, the mechanic will replace it and rewire it to the existing connections.

If the tail lights seems to be functioning properly, but the brake lights are not working, the mechanic should inspect the brake light switch. If the brake light switch is not responding to the brake pedal, the mechanic will remove the old switch, replacing it with a new one. The mechanic should then check to make sure that the brake lights are working and responding to the new switch.

In the case of any repair, the mechanic will make sure that he or she completes the necessary repairs and ensure the functionality of your new components. In the event that an issue with the taillights has triggered an error code, the mechanic will use a code reader/scanner to clear the code and its corresponding light.

How important is this service?

Tail and brake lights are designed to help other drivers see you on the road and if they are not working, you may be at an increased risk for an accident. A police officer may also cite you for not having functioning tail lights in the event you are pulled over. If you notice your tail lights have gone out, or are not working properly, you should stop driving the car and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
GMC Envoy L6-4.2L - Rear lights are not working - Philadelphia, Pennsylvania
Great mechanic, timely, professional, and knowledgeable.

Joshua

8 years of experience
45 reviews
Joshua
8 years of experience
GMC Yukon XL 1500 V8-5.3L - Catalytic Converter - Denton, Texas
Joshua was awesome. He showed up on time and completed the job to my complete satisfaction.

Rusty

23 years of experience
515 reviews
Rusty
23 years of experience
GMC Terrain L4-2.0L Turbo - Pre-purchase Car Inspection - Arlington, Texas
Rusty is an amazing mechanic whose knowledge and level of expertise never ceases to amaze me. I have used him several times on different vehicles of mines and he is very detailed in any work he does.. My go to mechanic

Craig

14 years of experience
12 reviews
Craig
14 years of experience
GMC Sierra 1500 V6-4.3L - Spark Plugs - Stockbridge, Georgia
Even though he was 10 minutes late, (to be expected in rural areas) he assessed the situation and proceeded to knock it out of the park! Highly knowlegable mechanic, would definitely use him again and will be referring him to friends / family.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50
Number of GMC services completed
32428+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Can Dirt and Mud Ruin Windshield Wiper Blades?
Your Your wiper blades are responsible for clearing a viewable path on your windshield so you can see where you’re going. They wipe away rain, snow, ice, dust, dirt, bird droppings, and any other debris that ends up on the...
What Does It Mean When My Car Is "Burning" Oil?
Burning oil is usually caused by leaking oil that burns up on hot engine or exhaust components. Fix leaking oil to prevent expensive car repairs.
How to Get a Replacement Car Key
Lost car keys can be extremely frustrating. Try to find missing keys first, then call a local locksmith to see if they can make a replacement car key.

Car won't start, even with jumpstart.

A long period of sitting can be harmful to a vehicle's battery. Your battery sort of learns a pattern of draining slightly and being charged back up again by the alternator. If this does not occur for a long period...

Car stalls all of a sudden for no reason while driving

Hello there, thank you for asking about your 2003 Ford Taurus. Your fuel pump in the fuel tank is most likely going bad and will seize up when it gets hot. Have the fuel pressure tested to see if you...

How long can I drive with a bad wheel bearing? How much does it cost to fix, not including labor?

Wheel bearing noise will always be dependent on vehicle speed, meaning as you speed up or slow down the noise should change frequency or loudness. Cornering may affect the noise from a damaged front wheel bearing and is usually more...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com