GMC Sierra 1500 HD Classic Loud noise is coming from rear brakes Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,262)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,262)

Loud noise is coming from rear brakes Inspection Service

How much does a Loud noise is coming from rear brakes Inspection cost?

On average, the cost for a GMC Sierra 1500 HD Classic Loud noise is coming from rear brakes Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeLoud noise is coming from rear brakes InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
Show example GMC Sierra 1500 HD Classic Loud noise is coming from rear brakes Inspection prices

Depending on the make and model you drive, you might have disc brakes on the front and drum brakes on the rear, or you could have four-wheel disc brakes. These are becoming more and more common today. However, regardless of the configuration, you should not have a loud noise coming from the rear brakes. This indicates that something has gone wrong, and there are several potential culprits.

How this system works:

Your rear brakes work similar to the front brakes. The master cylinder sends pressurized fluid through the brake lines. If you have rear drum brakes, the fluid causes the actuator to push the brake shoes outward, where they press against the inside of the drum. In the case of rear disc brakes, the fluid activates the caliper, which then squeezes the caliper between two brake pads.

This is identical to how your front brakes operate, but the pads are generally smaller than those used on the front. This is because most of the stopping power in your car is generated in the front.

However, your rear brakes are just as important as the front, and if you’re noticing a loud noise from the rear during braking, it could be a number of different things, depending on the type of noise and when it occurs.

Common reasons for this to happen:

  • Worn Brake Pads: Obviously, the most common potential problem here is worn out rear pads (or shoes if you have drum brakes). If you notice a loud grinding sound, it could be the metal backing plate from the pads making contact with the rotor.

  • Broken or Missing Caliper Bolt: Your calipers are essentially two halves held together with bolts (not the slide pins). If one of the bolts is missing or broken, it’s possible that part of the caliper has popped out and is making contact with your wheel.

  • Contact with the Squealer: Squealers are metal tabs designed to lightly contact the rotor and create a noise that warns you the pads are wearing down. If your pads are nearing the end of their life, it’s possible this is the noise you’re hearing.

  • Parking Brake Shoes Stuck: Your parking brake is located in the rear of the car. In a disc brake setup, there are shoes located inside the inner drum built into the rotor. If the shoes are stuck, it’s possible that the sound you’re hearing is them contacting metal while you’re driving.

  • Wheel Bearing Failure: If the noise you’re hearing is a “howl” and it’s constant, the first thing to suspect would be one of the wheel bearings (whichever side is the loudest while you’re driving).

  • Pads Settling into Place: If the sound you’re hearing is more of a “pop” or a loud click, it might be nothing more than your brake pads being slightly worn and settling into place when you push the brake pedal.

  • Normal Pad Vibration: If you only hear the noise when you’re backing up, it’s possible that it is just a normal vibration caused by the friction material of the pad lightly contacting the rotor’s surface. This is called “resonant frequency”, and can occur with both disc and drum brakes.

What to expect:

A top-rated mobile mechanic will come to your home or office and will inspect your rear brakes. This inspection will include the drums and shoes or the rotors and calipers. It should also include the brake lines and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your rear brake pads, the rotors, calipers, and the brake lines. It may be necessary to remove one or both rear wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify any and all noises.

How important is this service?

The mechanic will visually inspect the rear brakes, as well as other components that might be causing the noise you’re experiencing. It might be necessary for the mechanic to test drive the vehicle in order to duplicate the noise and better diagnose the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,262)

Rating Summary
3,088
87
22
11
54
3,088
87
22
11
54

Franky

30 years of experience
43 reviews
Franky
30 years of experience
GMC Yukon XL 1500 V8-5.3L - Loud noise is coming from rear brakes - Morton Grove, Illinois
Excellent experience with Franky! On time. Honest. Came to do brake job. In the process he informed me that my pads were in good shape and did not need to be replaced. Just cleaned and greased. Saved me $$!

Travis

11 years of experience
296 reviews
Travis
11 years of experience
GMC Sierra 1500 V8-5.3L - Starter - Webster, Texas
Punctual, efficient, knowledgeable, everything you look for in a mechanic. Will not consider using anyone but him at this point

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
GMC C1500 V6-4.3L - Power Steering Pressure Hose - Grand Prairie, Texas
I've utilized Rusty before today and have found him to be punctual and professional. thanks man!!!

Brian

8 years of experience
72 reviews
Brian
8 years of experience
GMC Terrain V6-3.0L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - West Chester, Ohio
This is the best service EVER! Brian was completely upfront and personable. He was in and out in no time at all and gave me great recommendations on other services that I will definitely use in the future. I'll recommend Brian to all of my friends and coworkers.

Excellent Rating

(3,262)

Rating Summary
3,088
87
22
11
54
3,088
87
22
11
54
Number of GMC services completed
35882+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0902 OBD-II Trouble Code: Clutch Actuator Circuit Low
What What the P0902 code means The P0902 is a generic OBD-II powertrain code, which means it applies to all makes and models of vehicles from 1996 to the present. What causes the P0902 code? There may be one or...
A Buyer’s Guide to the 2012 Porsche Cayenne
If If you’re looking for an SUV that offers plenty of cargo space, the ability to tow more than 7,000 pounds and that has luxury and fun to drive appeal, the 2012 Porsche Cayenne is your answer. Key Features All...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Maine
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks through the Maine State Police Traffic Division.

loud humming noise front in passenger side

It sounds like your humming noise is likely a bad wheel bearing or tire. I would lean more towards a bad wheel bearing. A visual inspection can easily determine where the noise is coming from in this case. Keep in...

Changed camshaft sensor but car still won't start, could it be the crankshaft sensor?

Hello, thanks for writing in. Most of the time, this code comes up when there is a difference between the crank and cam sensors. The most common failure is the crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor). These fail much more frequently (https://www.yourmechanic.com/article/how-long-does-a-crankshaft-position-sensor-last)...

It's cold outside car stopped starting up changed the spark plugs started up but now won't start

Hi there: Most of the time, when it's extremely cold outside, the problem is with the battery and an inability to have enough cold cranking amps to activate the starter and other ancillary components that allow the vehicle's ability to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com