GMC S15 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a GMC S15 Wheel Bearings Replacement is $176 with $22 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC S15L4-2.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$250.52Shop/Dealer Price$267.46 - $307.73
1990 GMC S15V6-4.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$238.81Shop/Dealer Price$253.45 - $292.00
1990 GMC S15V6-4.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$238.81Shop/Dealer Price$253.48 - $292.06
1990 GMC S15V6-4.3LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$267.49Shop/Dealer Price$289.33 - $349.41
1990 GMC S15V6-2.8LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$238.81Shop/Dealer Price$255.39 - $295.41
1990 GMC S15L4-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$267.49Shop/Dealer Price$289.51 - $349.73
1990 GMC S15L4-2.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$238.81Shop/Dealer Price$253.50 - $292.09
1990 GMC S15V6-4.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$267.49Shop/Dealer Price$289.33 - $349.41
Show example GMC S15 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
GMC S15 V6-2.8L - Valve Cover Gasket - Tacoma, Washington
He's great!

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
GMC S15 V6-4.3L - Tune-up - Fresno, California
Explained everything easily. Didn't seem to be in a rush, and got my vehicle in order. Thank you, Thank you, Thank you!

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
GMC S15 V6-2.8L - Air Shocks Replacement (Rear) - Clovis, California
Very good and efficient.

Colby

15 years of experience
66 reviews
Colby
15 years of experience
GMC S15 V6-2.8L - Car is overheating - Denver, Colorado
Colby was early and got right to work. Finished quickly and patiently explained issues and solutions.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of GMC S15 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Get Buick Dealership Certified
GM/Buick car dealerships offer automotive technician jobs to mechanics who are certified through the Universal Technical Institute (UTI) and GM.
P2200 OBD-II Trouble Code: NOx Sensor Circuit Bank 1
P2200 code means that the PCM has detected irregular readings in a NOx sensor circuit due to failed air flow or pressure sensors, or spark timing
P0277 OBD-II Trouble Code: Cylinder 6 Injector Circuit High
P0277 P0277 code definition This code means that there is an injector circuit malfunction affecting cylinder six. What the P0277 code means When this code appears, the ECM (engine control module) has reported that either the resistance of voltage for...

I am worried my airbags won’t work in a crash

As long as any new electrical gremlins that pop up are not related to the same passenger airbag circuit, I would doubt that this repair would cause new electrical issues. Ford has had this specific issue come up in the...

The AC in my truck isn't working - 2005 Ford F-150

Your a/c should of cycled out at 24 psi on the low side and you should not let it get to zero. The a/c cycling switch will need to be replaced first then the system rechecked. You will find the...

Hi. Thank you. I have a corrupted V6 and a 2009 Cadillac [SRX](/topics-srx/).

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com