GMC K1500 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(38)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(38)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a GMC K1500 Brake Pad Replacement is $228 with $60 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 GMC K1500V6-4.3LService typeBrake Pads - Rear ReplacementEstimate$510.40Shop/Dealer Price$553.64 - $663.92
1997 GMC K1500V8-5.0LService typeBrake Pads - Rear ReplacementEstimate$488.78Shop/Dealer Price$527.78 - $634.88
1994 GMC K1500V8-5.0LService typeBrake Pads - Front ReplacementEstimate$350.91Shop/Dealer Price$393.60 - $516.26
1998 GMC K1500V8-6.5L Turbo DieselService typeBrake Pads - Rear ReplacementEstimate$488.78Shop/Dealer Price$527.83 - $634.98
1992 GMC K1500V8-5.7LService typeBrake Pads - Rear ReplacementEstimate$496.38Shop/Dealer Price$540.87 - $656.37
1992 GMC K1500V8-6.2L DieselService typeBrake Pads - Rear ReplacementEstimate$496.38Shop/Dealer Price$537.67 - $650.77
1990 GMC K1500V8-5.7LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$378.84 - $501.36
1996 GMC K1500V8-5.7LService typeBrake Pads - Front ReplacementEstimate$350.91Shop/Dealer Price$393.60 - $516.25
Show example GMC K1500 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(38)

Rating Summary
37
1
0
0
0
37
1
0
0
0

Ramon

19 years of experience
157 reviews
Ramon
19 years of experience
K1500 1998 - Door does not lock or open - Tucson, AZ
Very proficient and prompt. Got me back on the road very quickly.

Ramon

19 years of experience
157 reviews
Ramon
19 years of experience
K1500 1998 - Fuel Pump - Tucson, AZ
He handled a tough job with great professionalism. Will ask for Ramon on future projects.

Luis

3 years of experience
32 reviews
Luis
3 years of experience
K1500 1996 - Oil Change - Mechanicsville, VA
Luis was just here for an oil change, my daughters truck needs some brake attention and I feel very comfortable with Luis doing the work for her. Will be making another appointment with him! Very knowledgeable, thorough and friendly!

Michael

0 years of experience
243 reviews
Michael
0 years of experience
K1500 1990 - Windshield Wiper Blade - Las Vegas, NV
It took longer than he expected to drain, remove, and clean the fuel tank and replace the fuel pump on my 1990 GMC truck, but he kept at it. He’s an awesome mechanic and I’d request him again if the need arises!!!

Excellent Rating

(38)

Rating Summary
37
1
0
0
0
37
1
0
0
0
Number of GMC K1500 services completed
418+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0321 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit Range/Performance
P0321 P0321 code definition Ignition/Distributor Engine Speed Input Circuit Range/Performance What the P0321 code means P0321 is an OBD-II generic code that the engine control module (ECM) detected the engine speed input sensor circuit out of range or its performance...
The Top 10 Car Cleaning Products (Interior & Exterior)
If you are as proud of your car as most people are, then its care and upkeep is...
How to Tune and Adjust Your Carburetor
While all modern cars use computer-controlled fuel distribution systems, there are still many vehicles on the road that employ the traditional carbureted method of...

Very rough idle goes away at speed. Can it be the cam solenoid?

Hey there. This may be related to a dirty or failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

Squeaking brakes

Hello there, squeaking brakes can be caused my many different faults on your 2008 Volvo XC90. The most common causes are the improper brake pad material. There are two different kinds of brake pad material that are common, semi-metallic, and...

I put my car in park then tried to put in drive and it was in reverse all of gears are in reverse and wont show gear on dash.

Check to be sure that the manual lever on the top of the transmission actually moves into each "detent" position, beginning with the park position, as you move the gear shifter. In all likelihood, the manual lever is not moving,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com