GMC G3500 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a GMC G3500 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1980 GMC G3500V8-6.6LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1988 GMC G3500V6-4.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1986 GMC G3500V8-6.2L DieselService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 GMC G3500V8-5.7LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1992 GMC G3500V8-7.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 GMC G3500V8-7.4LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 GMC G3500V8-6.5L DieselService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1988 GMC G3500V8-7.4LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC G3500 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Derrick

11 years of experience
176 reviews
Derrick
11 years of experience
GMC G3500 V8-5.7L - Car Starter Repair - Alameda, California
Derrick showed up on time and completed the job on time and is a nice man.

Robert

20 years of experience
1126 reviews
Robert
20 years of experience
GMC G3500 V8-7.4L - Car is not starting - Denver, Colorado
He did a great job.

William

34 years of experience
569 reviews
William
34 years of experience
GMC G3500 V8-5.7L - Steering wheel feels loose Inspection - Peoria, Arizona
As usual, William was fantastic, and explained/showed me the issue in detail. He is very customer service oriented & extreamly knowledgeable!!!

William

34 years of experience
569 reviews
William
34 years of experience
GMC G3500 V8-5.7L - Spark Plugs - Peoria, Arizona
William was a fantastic mechanic and was very informative and courteous. He is definitively an asset to your company.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC G3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Why Do Brakes Squeal?
Worn brake pads are what causes car brakes to squeal or squeak. Replace your brake pads and resurface your brake rotors to stop the squeaky noise.
P0501 OBD-II Trouble Code: Vehicle Speed Sensor Range/Performance
P0501 code definition Vehicle Speed Sensor Range/Performance What the P0501 code means P0501 is an OBD-II generic code that the engine control...
P004A OBD-II Trouble Code: Turbocharger/Supercharger Boost Control “A” Circuit/Open
P004A means there is an issue with the turbocharger or supercharger boost control in the “A” circuit due to malfunctioning boost sensor or intercooler

Filling Windshield Water Tank 100%

Hello. Every dealer and manufacturer will have policies regarding certain things. Typically engine damage will not occur if it is completely filled. I do know that most manufacturers, such as Honda, do not recommend it because if it is filled...

Shifts early jerks engine - 1994 GMC K2500

Hello. You will need to remove the EGR valve to clean out the carbon and then decarbonize the engine. The code 28 may be due to the transmission or transmission module controller PCM has a bad internal driver to control...

Back wheels bow out at bottom

Front or rear wheels can bow out for a number of reasons. In alignment terms, we call this negative camber. Camber is the angle of the wheels when looking straight at them from the front or rear. When the tops...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com