GMC G1500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a GMC G1500 Front Crankshaft Seal Replacement is $170 with $16 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 GMC G1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$244.70Shop/Dealer Price$260.18 - $296.09
1990 GMC G1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$243.61Shop/Dealer Price$255.98 - $287.32
1991 GMC G1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$218.39Shop/Dealer Price$231.42 - $265.49
1990 GMC G1500V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$218.39Shop/Dealer Price$231.42 - $265.49
1992 GMC G1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$276.78Shop/Dealer Price$292.91 - $329.31
1995 GMC G1500V8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$276.78Shop/Dealer Price$290.78 - $325.58
1991 GMC G1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$243.61Shop/Dealer Price$256.03 - $287.42
1992 GMC G1500V8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$276.78Shop/Dealer Price$290.56 - $325.19
Show example GMC G1500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Charles

27 years of experience
134 reviews
Charles
27 years of experience
GMC C3500 V8-6.5L Turbo Diesel - Front Crankshaft Seal - Seattle, Washington
Very friendly and professional did a great job

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
GMC Acadia V6-3.6L - Front Crankshaft Seal - Las Vegas, Nevada
knows what he is doing and is personable

Rodrigo

16 years of experience
133 reviews
Rodrigo
16 years of experience
GMC Terrain L4-2.4L - Front Crankshaft Seal Replacement - Henderson, Nevada
n/a

Harold

33 years of experience
52 reviews
Harold
33 years of experience
GMC Terrain L4-2.4L - Front Crankshaft Seal - Jacksonville, Florida
He was the only one who actually solved the issue rather than just continuing to put a bandaid on it, good job.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Front Crankshaft Seal Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0388 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit High Input
P0388 means an excessive high volt signal from the crankshaft sensor was detected by the car's computer.
Can You Switch Between Regular and Synthetic Motor Oil?
If you have ever wondered if you can switch between regular and synthetic motor oil, you need to consider what type of oil works best for your engine.
Child Seat Safety Laws in Ohio
In In the state of Ohio, there are laws covering the transportation of children in motor vehicles. The laws are based in common sense and the knowledge that child seats save lives and prevent injuries. It is the responsibility of...

my ASB light

I am assuming that you are talking about you ABS light for your antilock braking system. You will need a slightly advanced computer scan tool to read the codes stored in the computer. From there, additional diagnosis can be performed....

Clicking noise from steering wheel

Hello, thanks for writing in. Most of the time this clicking noise is from the column covers rubbing on the steering wheel. I usually remove the covers and drive the vehicle to see if it goes away. If it does...

When I'm driving, my car does this little lurch thing constantly, like it has little accelerations.

Hi there. Check the idle air control valve (IAC) to see if it's plugged up. When the vehicle sits, sometimes the IAC valve can stop working and get plugged up. Remove the vacuum hose to the IAC valve and see...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com