GMC Envoy XUV AC Condenser Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

AC Condenser Replacement Service

How much does a AC Condenser Replacement cost?

On average, the cost for a GMC Envoy XUV AC Condenser Replacement is $637 with $371 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 GMC Envoy XUVL6-4.2LService typeAC Condenser ReplacementEstimate$1063.27Shop/Dealer Price$1276.60 - $1853.58
2004 GMC Envoy XUVV8-5.3LService typeAC Condenser ReplacementEstimate$1007.27Shop/Dealer Price$1220.65 - $1797.67
2004 GMC Envoy XUVL6-4.2LService typeAC Condenser ReplacementEstimate$1007.27Shop/Dealer Price$1220.65 - $1797.66
2005 GMC Envoy XUVV8-5.3LService typeAC Condenser ReplacementEstimate$1007.27Shop/Dealer Price$1220.58 - $1797.55
Show example GMC Envoy XUV AC Condenser Replacement prices

What is the AC Condenser all about?

The AC system has many key components: compressor, condenser, receiver dryer, evaporator, and hoses. For an AC system to work, it needs a gas or liquid substance called refrigerant (R-12 in older cars, R-134a in 1995 and newer cars). The job of an AC condenser is to convert the AC gas into a liquid form by cooling it.

There are two common causes of condenser failure. The first scenario occurs when the condenser starts leaking. The condenser has tubes and seals, both of which can leak with normal wear and tear. Since there is no way to replace these tubes and seals, you will need a new condenser. Keep in mind this can also be caused by physical damage as the condenser is mounted near the front of the car and as such is susceptible to rocks or other road debris.

In the second scenario, the condenser is unable to circulate the refrigerant due to metallic debris blockage. This debris is often the result of a failing or defective AC compressor where internal parts of the compressor come apart and disperse metallic debris throughout the system. If this is the case, you will not only need a new condenser, but also a new AC compressor, orifice tubes, and receiver dryer.

Keep in mind:

  • When the AC condenser is replaced, the compressor, orifice tubes, and receiver dryer often have to be replaced as well.
  • Any refrigerant that has not leaked out will need to be vacuumed out.

How it's done:

  • Install an AC gauge set to measure the pressure.
  • Inspect the condenser for leaks.
  • If condenser is bad, remove all of the refrigerant.
  • Remove and replace condenser.
  • Evac and recharge the AC system.
  • Leak check for any system leaks.
  • Check for proper operation of the AC system.

Our recommendation:

The AC system is a sealed unit. It is not something you will inspect or service unless you notice a change. If you notice a change in the temperature of the air through the AC vents (not as cold as it should be), schedule an inspection.

What common symptoms indicate you may need to replace the AC Condenser?

  • Air conditioning is not as cold as it should be.
  • Air conditioning does not work at all.

How important is this service?

In addition to your comfort, air conditioning systems add value to your vehicle. You should keep your AC fully operational. In some systems, the hot and cold air are blended to achieve the desired temperature setting. In these cases, when the AC system fails, you will not only not get any cold air, but the entire temperature regulation is thrown off.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0

Robert

20 years of experience
1098 reviews
Robert
20 years of experience
GMC Envoy XUV V8-5.3L - Water Pump - Arvada, Colorado
He was very professional and personable.. he did not leave until he was sure that the car was running like it was supposed to and that I was satisfied

Yahshif

10 years of experience
128 reviews
Yahshif
10 years of experience
GMC Envoy XUV L6-4.2L - Pre-purchase Car Inspection - Long Beach, California
Yashif was extremely knowledgeable and professional. Tremendous personal knowledge in 4wd, transfer cases, engines and vehicle manufacture design. Highly highly recommended. Very passionate about mechanics. Expert pre-purchase inspection.

Manuel

41 years of experience
132 reviews
Manuel
41 years of experience
GMC Envoy XUV V8-5.3L - Oil Change - San Antonio, Texas

Lucas

10 years of experience
33 reviews
Lucas
10 years of experience
GMC Envoy XUV L6-4.2L - Exhaust Manifold - Frederick, Maryland
Lucas was professional and knowledgeable. He went about his business and did a good job.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0
Number of GMC Envoy XUV services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

What Are the Different Types of Windshield Wipers?
When When you need to clean your windshield, you spray washer fluid onto the glass and turn on your windshield wipers. They swipe back and forth to remove any visual obstructions that may have collected on the glass. There are...
How to Use Car Headlights
Headlights (https://www.yourmechanic.com/article/how-a-vehicle-s-headlights-work) are not only an important safety component on your vehicle, but also a feature that you are legally obligated to use....
P0771 OBD-II Trouble Code: Shift Solenoid E Performance or Stuck Off
P0771 code means there is an detected problem within shift solenoid "E" often due too low/dirty transmission fluid or shorted wiring.

Car lost power steering, leaking coolant.

Hello it sounds like you have two problems here. Both of theses should be handled sooner than later. For the power steering the fluid level should be checked and see if the belt is on the pulley. If the fluid...

Can i bolt a sheet of wood underneath my car to prevent rust?

Hello, and thank you for writing in. Wood absorbs water, and due to that physical trait, you should not use wood to help prevent rust damage. This will instead hold the moisture close to the metal components and influence them...

Hello, I have a 2010 Mercedes c300. Lately each time I put gas the car won’t start until I keep pushing gas pedal. Code p2422

The codes (P0174, P0171) indicate insufficient fuel relative to the air charge (i.e., lean operation). Lean operation can be caused by a faulty fuel pressure regulator, a weak fuel pump, a clogged fuel filter, a faulty powertrain control module (not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com