GMC Envoy XL Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a GMC Envoy XL Valve Cover Gasket Replacement is $236 with $40 for parts and $196 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2006 GMC Envoy XLV8-5.3L	Service typeValve Cover Gasket Replacement	Estimate$297.44	Shop/Dealer Price$322.59 - $386.70
2004 GMC Envoy XLV8-5.3L	Service typeValve Cover Gasket Replacement	Estimate$284.83	Shop/Dealer Price$307.50 - $369.76
2006 GMC Envoy XLL6-4.2L	Service typeValve Cover Gasket Replacement	Estimate$302.69	Shop/Dealer Price$329.86 - $405.54
2002 GMC Envoy XLL6-4.2L	Service typeValve Cover Gasket Replacement	Estimate$293.85	Shop/Dealer Price$318.81 - $387.86
2003 GMC Envoy XLL6-4.2L	Service typeValve Cover Gasket Replacement	Estimate$293.85	Shop/Dealer Price$320.87 - $391.47
2005 GMC Envoy XLV8-5.3L	Service typeValve Cover Gasket Replacement	Estimate$284.83	Shop/Dealer Price$307.73 - $370.16
2005 GMC Envoy XLL6-4.2L	Service typeValve Cover Gasket Replacement	Estimate$293.85	Shop/Dealer Price$318.83 - $387.90
2004 GMC Envoy XLL6-4.2L	Service typeValve Cover Gasket Replacement	Estimate$293.85	Shop/Dealer Price$318.81 - $387.86

Show example GMC Envoy XL Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(70)

Rating Summary

70

0

0

0

0

70

0

0

0

0

SEE REVIEWS NEAR ME

Theodore

10 years of experience

1656 reviews

Request Theodore

Theodore

10 years of experience

Request Theodore

by Presila E Delacruz

Envoy XL 2002 - Car idle is rough - Bellevue, WA

Very informative and honest.

Ruben

9 years of experience

55 reviews

Ruben

9 years of experience

by Paul Jones

Envoy XL 2006 - Alternator - Columbia, SC

Prompt. Professional. Used professional new oem alternator. Works flawlessly. If I need future service, PLEASE set it up so that Ruben will be my mechanic!

Arturo

25 years of experience

253 reviews

Arturo

25 years of experience

by Michael Sevier

Envoy XL 2004 - Brakes, Steering and Suspension Inspection - Chula Vista, CA

Very happy with the service to my vehicle.

Jay

30 years of experience

1009 reviews

Jay

30 years of experience

by Cecelia’s or Alfonso

Envoy XL 2005 - Tune-up - Colton, CA

Friendly

Excellent Rating

(70)

Rating Summary

70

0

0

0

0

70

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

P2177 OBD-II Trouble Code: System Too Lean Off Idle Bank 1

P2177 code definition P2177 is a general OBD-II diagnostic trouble code indicating a fault with the bank 1 too lean. This code...

P0416 OBD-II Trouble Code: Secondary Air Injection System Switching Valve B Circuit Open

P0416 means there is an issue with the secondary air injection system, likely due to icing inside the pump from a failed check valve.

P0860 OBD-II Trouble Code: Gear Shift Module Communication Circuit

P0860 means there is an issue in the gear shift module communication circuit, likely due to a defective sensor or problematic electrical components.

What does the Intelligent Key™ removal indicator mean?

While your car’s Intelligent Key™ allows remote start and stop functions, it can easily be left behind, particularly if the battery is dead and you have to insert the key into the port. If your vehicle information display is showing...

Car cranks but won't start

Hello. A no start condition can be caused by many things. A few common causes are issues with the fuel, ignition, or engine management systems. It may be possible that one of the components to these systems, such as the...

Im needing to locate my fuel reset button on my 2002 Infiniti i35

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com