logo

GMC Canyon Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(59)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(59)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a GMC Canyon Wheel Bearings Replacement is $201 with $61 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 GMC CanyonL5-3.7LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$324.14Shop/Dealer Price$359.48 - $454.97
2005 GMC CanyonL5-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$312.43Shop/Dealer Price$345.47 - $439.24
2006 GMC CanyonL5-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$312.43Shop/Dealer Price$345.50 - $439.30
2018 GMC CanyonL4-2.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$559.09Shop/Dealer Price$653.83 - $932.61
2005 GMC CanyonL5-3.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$312.43Shop/Dealer Price$347.42 - $442.65
2007 GMC CanyonL4-2.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$312.43Shop/Dealer Price$345.68 - $439.61
2018 GMC CanyonL4-2.8L Turbo DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$475.69Shop/Dealer Price$549.60 - $765.85
2017 GMC CanyonL4-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$559.09Shop/Dealer Price$653.83 - $932.61
Show example GMC Canyon Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of GMC Canyon services completed
649+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(59)
Rating Summary
55
1
1
0
2
55
1
1
0
2

Andrew

27 years of experience
72 reviews
Request Andrew
Andrew
27 years of experience
Request Andrew
by Malcolm
GMC Canyon L5-3.5L - Brake Caliper Replacement (Passenger Side Front) - Durham, North Carolina
I liked Andrew a lot. He arrived early and was done in no time. I would definitely recommend him to all of my friends and colleagues. Very professional and I WILL be calling him for futures handicap issues

Jacob

13 years of experience
329 reviews
Request Jacob
Jacob
13 years of experience
Request Jacob
by Kevin
GMC Canyon L4-2.9L - AC is not working - Dallas, Texas
Tracked down and fixed the leak much faster than I thought anyone could. Air still nice and cool.

Eduardo

20 years of experience
570 reviews
Request Eduardo
Eduardo
20 years of experience
Request Eduardo
by Al
GMC Canyon L5-3.5L - Starter - Alvin, Texas
He was very efficient .I usually did my own mechanic work, but I could not figure out how to replace the starter on my 2006 GMC Canyon. It looked like an impossible task without removing half the engine. He was able to get it out and replaced without removing anything but a tire. Very impressed! He also took care of a problem I did not know I had.

Tim

22 years of experience
55 reviews
Request Tim
Tim
22 years of experience
Request Tim
by Craig
GMC Canyon L4-2.8L - Brakes, Steering and Suspension Inspection - McDonough, Georgia
Tim was so awesome. Very knowledgeable and friendly. Explained all the details involved, and was very polite and friendly. This was a great experience and I am looking forward to using yourmechanic.com again very soon.

Excellent Rating

(59)
Rating Summary
55
1
1
0
2
55
1
1
0
2
Number of GMC Canyon services completed
649+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

P0746 OBD-II Trouble Code: Pressure Control Solenoid Performance or Stuck Off
P0746 code means the PCM has detected an irregularity in the electronic pressure control solenoid circuit often due too blockages or low fuel levels.
Read more
Is Pay-Per-Mile Insurance Right for You?
Chances Chances are you pay the same amount for your car insurance bill each month, unless you make a change to your policy or vehicle. But if you go days (or weeks) without driving, doesn’t it seem unfair that your...
Read more
How to Transfer a Car Title in Arizona
Without Without a title, there is no proof that you own the car you’re driving. Whenever a car is bought or sold, the title must be transferred from the original owner to the new owner (the buyer). In the state...
Read more

How do I delete or edit the contacts in the Uconnect phonebook?

If you are editing a contact, press the Uconnect phone button, which is a telephone symbol on either the center console or the steering wheel. The system will say “Ready” and beep, at which point you should say “Phonebook edit...
Read more

I have a 2012 Chevy Cruze, the compass, on star and phone stopped working. Can you tell me what's wrong?

Hello. Most of the time if all of these stopped working at the same time then you either have a failure in the body control module or in the communication module. Most of the time this is a body control...
Read more

2014 Ford Focus Blower Resistor Location

If you have Electronic Manual Temperature Control (EMTC), the blower motor resistor block is accessed by removing the accelerator pedal. Once the pedal is removed you will see the wiring harness to the block and the single retaining screw that...
Read more
  1. Home
  2. Estimates
  3. GMC
  4. Canyon
  5. Wheel Bearings Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE