Ford Probe Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(14)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(14)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Ford Probe Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Ford ProbeV6-3.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1993 Ford ProbeV6-2.5LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Ford ProbeL4-2.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Ford ProbeL4-2.2L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1996 Ford ProbeL4-2.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1992 Ford ProbeL4-2.2LService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Ford ProbeL4-2.2LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1997 Ford ProbeL4-2.0LService typeCar shuts off when stepping on gas pedal InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Probe Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

AARON

2021 years of experience
12 reviews
AARON
2021 years of experience
Ford Probe L4-2.0L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Sacramento, California
After Aaron reviewed by engine turn off issue when stopped idling, he inspected the car and then suggested oxygen sensor and spark plug replacement. Ok, great. Being a very old car, I probably would have been ok with a lot more. After Aaron completed the work I drove the car for about an hour, including 30+ stops in traffic downtown and it was great: engine sounded better idling ... acceleration from stop was like a turbo boost was added. I was having deja vu from when my car was new. Thanks Aaron. First mechanic in a long while to get my car that much in tune.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Ford Probe V6-2.5L - Fuel Filter Replacement - Tucson, Arizona
Very nice, got the job done and even let me be a bother and watch

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Ford Probe L4-2.2L Turbo - Clutch Master Cylinder - Tampa, Florida
Torrieanto, was very good. My only issue was he was delayed getting here. After driving the car, the clutch still has some play in it. Don't think it is his fault, the line probably just needs to be bled some more. If possible I would like to speak with Torrieanto to address the issue.

Bryant

12 years of experience
605 reviews
Bryant
12 years of experience
Ford Probe L4-2.2L - Car does not shift from park to drive Inspection - Fishers, Indiana
He was very knowledgeable and will tell you a more affordable option when fixing your car.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Ford Probe services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

P2038 OBD-II Trouble Code: Reductant Inj Air Press Sensor Circ Range/Performance
The The P2038 code is a general OBD-II diagnostic trouble code that points to a fault with the reductant injection air pressure sensor “A” circuit range / performance. What the P2038 code means The reductant injection system adds air or...
P0287 OBD-II Trouble Code: Cylinder 9 Contribution/Balance Fault
P0287 P0287 code definition A P0287 Trouble Code indicates cylinder 9 contribution/balance fault. What the P0287 code means In the event of a P0287 code appearing and storing in the vehicle, it means that there is an abnormal reading in...
P0973 OBD-II Trouble Code: Shift Solenoid A Control Circuit Low
P0973 means there is an error with the shift solenoid A control circuit due to a faulty solenoid, control circuit,or low or dirty transmission fluid.

Message come up Reduce engine power

A reduced power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in some cases...

Car was in a flood. I checked the air filter and it was wet. I also checked the oil to the engine and it was brown.

Hello, thank you for writing in. Unfortunately, attempting to start the vehicle soon after it "dries out" can cause more problems. This happens for various reasons depending on what has been flooded. Typically the first step is to disconnect the...

High idling 3000-4000 rpm after cleaning throttle body...even after warming .....relearn procedure not working nissan altima 2007

Hi Muhibur. Thanks for sending your question today. This could be either a vacuum leak or an issue with the ECU that is causing this high RPM issue. The only way to know for sure is to have a professional...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com