Ford Focus Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Ford Focus Fuel Pump Replacement is $344 with $162 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Ford FocusL4-2.0LService typeFuel Pump ReplacementEstimate$1728.79Shop/Dealer Price$2043.24 - $2959.44
2005 Ford FocusL4-2.3LService typeFuel Pump ReplacementEstimate$986.80Shop/Dealer Price$1096.58 - $1409.62
2014 Ford FocusElectricService typeFuel Pump ReplacementEstimate$939.67Shop/Dealer Price$1055.08 - $1386.89
2018 Ford FocusL3-1.0L TurboService typeFuel Pump ReplacementEstimate$912.74Shop/Dealer Price$1054.32 - $1468.62
2010 Ford FocusL4-2.0LService typeFuel Pump ReplacementEstimate$1191.62Shop/Dealer Price$1358.52 - $1829.61
2006 Ford FocusL4-2.3LService typeFuel Pump ReplacementEstimate$986.80Shop/Dealer Price$1097.23 - $1410.75
2017 Ford FocusL4-2.3L TurboService typeFuel Pump ReplacementEstimate$795.94Shop/Dealer Price$936.07 - $1349.28
2017 Ford FocusL3-1.0L TurboService typeFuel Pump ReplacementEstimate$737.55Shop/Dealer Price$876.90 - $1289.53
Show example Ford Focus Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(6)

Rating Summary
5
0
1
0
0
5
0
1
0
0

Excellent Rating

(6)

Rating Summary
5
0
1
0
0
5
0
1
0
0
Number of Ford Focus Fuel Pump Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in Louisville, Kentucky
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Louisville is NAPA Auto Parts.
P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
P0765 OBD-II Trouble Code: Shift Solenoid D Malfunction
P0765 code means there was an abnormality detected within solenoid D often due too internal blockages or malfunctioning transmission parts.

Ticking noise coming from engine - 2006 BMW 525xi

The source of the noise must be determined first. The ticking noise may be caused by air in the lifters, this is a common complaint and BMW has a TSB out to address this concern. There is a bleeding procedure...

Changed camshaft sensor but car still won't start, could it be the crankshaft sensor?

Hello, thanks for writing in. Most of the time, this code comes up when there is a difference between the crank and cam sensors. The most common failure is the crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor). These fail much more frequently (https://www.yourmechanic.com/article/how-long-does-a-crankshaft-position-sensor-last)...

The "Check charging system alert comes on all the time, looses momentum, dies constantly

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com