Ford Five Hundred Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(172)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(172)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford Five Hundred Power Steering Pressure Hose Replacement is $591 with $367 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Ford Five HundredV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$981.98Shop/Dealer Price$1171.24 - $1726.04
2007 Ford Five HundredV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$967.56Shop/Dealer Price$1153.99 - $1706.68
2005 Ford Five HundredV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$967.56Shop/Dealer Price$1154.03 - $1706.75
Show example Ford Five Hundred Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(172)

Rating Summary
162
5
1
1
3
162
5
1
1
3

Jose

17 years of experience
324 reviews
Jose
17 years of experience
Ford Five Hundred V6-3.0L - Car idle is rough - Fort Lauderdale, Florida
Jose was on time and kept me informed along the way. I was very pleased with his work and with complete your mechanic team. This was my first time using this service and I will be recommending it to everyone I know.

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Ford Five Hundred V6-3.0L - Check Engine Light is on Inspection - Jacksonville, Florida
Brian was early for the appt. He explained everything throughly to where I could understand.

Jerry

9 years of experience
136 reviews
Jerry
9 years of experience
Ford Five Hundred V6-3.0L - Fuel Filter - Suwanee, Georgia
Awesome!

Mike

14 years of experience
176 reviews
Mike
14 years of experience
Ford Five Hundred V6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Raleigh, North Carolina
Mike is very friendly and knowledgeable. You can tell he cares about his clients and making them aware of the service he is providing. I will definitely be a returning customer.

Excellent Rating

(172)

Rating Summary
162
5
1
1
3
162
5
1
1
3
Number of Ford Five Hundred services completed
1892+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0895 OBD-II Trouble Code: Shift Time Too Short
P0895 code means that there is an abnormality in the shift time between individual gears due to transmission blockage, failure, or dirty fluid.
P0332 OBD-II Trouble Code: Knock Sensor 2 Circuit Low Input (Bank 2)
Trouble code P0332 means the PCM is receiving a reading that the knock sensor is too low, which can result in higher emissions and engine problems.
Symptoms of a Bad or Failing Fuel Rail Sensor
Common signs include the Check Engine Light coming on, the car not feeling right when running, and issues with starting the car.

1983 toyota corolla 69k miles on it and when I'm driving it acts like it wont take any gas.

If the exhaust smells like gasoline, the fuel mixture is either way too rich or you have a weak ignition system that is not burning the fuel efficiently. You can pull spark plugs out to check them and if they...

My audi q3 needs only one one tire replaced. It is a 2016 model with less than 5k miles. Will I still need to replace all 4 tires

Hi there. Thanks for writing into YourMechanic.com. You are correct in assuming that all four tires should be the same on an all-wheel drive vehicle. However, with less than 5,000 miles on the new tires, it would be OK to...

I'm having transmission problems with my 2011 Chevy Equinox. When I turn the car on the odometer starts at a 2.

The slow acceleration that you are describing could be engine or transmission related. If the vehicle is not shifting at the correct shift points, and consequently engine RPM's go way up (to 4,000-5,000 RPM) as it is stuck in a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com