Ford F-250 Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Ford F-250 Car Battery Replacement is $300 with $160 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1991 Ford F-250V8-5.0L	Service typeCar Battery Replacement	Estimate$491.20	Shop/Dealer Price$578.85 - $833.70
1993 Ford F-250V8-5.8L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$568.07 - $821.60
1997 Ford F-250V8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$568.10 - $821.64
1991 Ford F-250V8-5.8L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$568.10 - $821.64
1998 Ford F-250V8-5.4L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.57 - $824.22
1990 Ford F-250V8-7.5L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$568.24 - $821.89
1995 Ford F-250L6-4.9L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$568.11 - $821.67
1995 Ford F-250V8-7.3L Turbo Diesel	Service typeCar Battery Replacement	Estimate$503.77	Shop/Dealer Price$595.07 - $864.80

Show example Ford F-250 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(112)

Rating Summary

103

4

0

1

4

103

4

0

1

4

SEE REVIEWS NEAR ME

Christopher

15 years of experience

286 reviews

Request Christopher

Christopher

15 years of experience

Request Christopher

by Sheila Christensen

F-250 1995 - Door does not lock or open - Spring Hill, FL

He was very polite and fixed the problem very quickly I am very happy

Rafael

25 years of experience

65 reviews

Rafael

25 years of experience

by Colin Stinson

F-250 1984 - Adjust Ignition Timing - Berkeley, CA

Rafael was knowledgeable, friendly, and methodical in his work. He showed great attention to detail and combined his understanding of a wide range of vehicles to accurately diagnose and fix mechanical issues—he's an experienced, excellent mechanic. Thank you!

Carlos

10 years of experience

57 reviews

Carlos

10 years of experience

by Luis Mendoza

F-250 1991 - Car is not starting - Tracy, CA

Very knowledgeable and informative.

David

5 years of experience

188 reviews

David

5 years of experience

by Dominic rooijackers

F-250 1992 - Adjust Drive Belts - Kissimmee, FL

Work done right and quick

Excellent Rating

(112)

Rating Summary

103

4

0

1

4

103

4

0

1

4

SEE REVIEWS NEAR ME

Recent articles & questions

P0819 OBD-II Trouble Code: Up and Down Shift Switch to Transmission Range Correlation

P0819 means there is an issue a voltage or resistance problem with the transmission's up- and down- shift switch, likely due to a manufacturer fault.

Symptoms of a Bad or Failing Windshield Wiper Blade

Common signs include streaking on the glass, a screeching sound when wipers operate, and wiper blades bouncing as they operate.

The Traveler’s Guide to Driving in Bahamas

When When you think of the Bahamas, your mind conjures up images of sandy beaches and clear blue water. While you will certainly want to enjoy the beaches such as Gold Rock Beach and Pink Sands Beach on your next...

Car won't accelerate and warning light flashing.

The flashing light you are seeing is most likely your Check Engine Light. When the Check Engine Light is solid, then this is letting you know that there is a problem with the emissions system in your vehicle. When the...

Check Engine Light - 2013 Chevrolet Malibu

Hi there: Sometimes minor fender bender can trigger other issues to appear, especially if a loose sensor or wire was damaged during the incident. If the engine is making a weird sound while the heater is active, it's possible that...

My anti theft on my vehicle went off and now I’m unable to crank

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com