Ford F-150 Heritage Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Ford F-150 Heritage Car Battery Replacement is $308 with $168 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford F-150 HeritageV8-5.4LService typeCar Battery ReplacementEstimate$491.20Shop/Dealer Price$578.85 - $833.70
2004 Ford F-150 HeritageV8-4.6LService typeCar Battery ReplacementEstimate$482.19Shop/Dealer Price$568.07 - $821.60
2004 Ford F-150 HeritageV6-4.2LService typeCar Battery ReplacementEstimate$482.19Shop/Dealer Price$568.10 - $821.64
2004 Ford F-150 HeritageV8-5.4L TurboService typeCar Battery ReplacementEstimate$482.19Shop/Dealer Price$568.10 - $821.64
Show example Ford F-150 Heritage Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
F-150 Heritage 2004 - Brake System Flush - Atlanta, GA
Honest, punctual and explained everything in a way that was easy to understand! Thanks again Mazyar!

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
F-150 Heritage 2004 - Emergency / Parking Brake Shoe - Atlanta, GA
Honest, punctual and explained everything in a way that was easy to understand! Thanks again Mazyar!

Mazyar

5 years of experience
372 reviews
Mazyar
5 years of experience
F-150 Heritage 2004 - Clunking or knocking noise from wheels - Atlanta, GA
Mazyar is terrific! He shows up on time and did a great job of diagnosing the service needed on my car. Thanks Mazyar!

Christopher

15 years of experience
286 reviews
Christopher
15 years of experience
F-150 Heritage 2004 - Ball Joint Front - New Port Richey, FL
organized focused

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of Ford F-150 Heritage services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Safely Drive on Icy Roads
Knowing how to drive on iced-over roads is an big part of safe winter driving. Prepare in advance, check your tires, and drive slowly to drive on ice.
Tips for taking care of your car during smokey weather and record heat
How to protect your car against smoke, ash and extreme summer heat
P2265 OBD-II Trouble Code: Water in Fuel Sensor Circuit Range/Performance
P2265 P2265 code definition The P2265 diagnostic trouble code is an indication that there is a range/performance issue with the water in fuel sensor circuit. Related Trouble Codes: P2264 OBD-II Trouble Code: Water in Fuel Sensor Circuit P2266 OBD-II Trouble...

Passenger headlight duller and full beam does not work

Hi, thanks for writing in. When you went to replace the bulb, did you find any amount of corrosion or signs of burns on the connectors or bulb sockets? Try replacing all of the bulbs at the same time before...

Vehicle not starting

Hi there: We're not quite certain what you're asking; however, the P0255 OBD-II trouble code (https://www.yourmechanic.com/article/p0255-obd-ii-trouble-code-injection-pump-fuel-metering-control-a-intermittent-cam-rotor-injector-by-valerie-johnston) is typically triggered by dirty fuel filter, clogged fuel filter, defective fuel pump or open electrical connectors or sensors. The best way to have...

2001 honda civic ex and was driving down the highway and the car went into limp mode.

One of these codes is for a faulted signal from the intake air temperature sensor. Many newer vehicle have this sensor integrated into the mass air flow sensor and this code trips when the sensor offers a vehicle to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com