Ford Aspire Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(8)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(8)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Ford Aspire Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Ford AspireL4-1.3LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1994 Ford AspireL4-1.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Ford AspireL4-1.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Ford AspireL4-1.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Ford Aspire Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Ford Aspire L4-1.3L - Oil Change - Union City, California
Trung is very proficient in getting the job done right the first time and arrives in a timely manner if not earlier than expected. Excellent Customer service! Highly recommend Trung for your vehicle repairs. Thanks Trung! AAA+++

Matthew

33 years of experience
1235 reviews
Matthew
33 years of experience
Ford Aspire L4-1.3L - Car is overheating - Williamsburg, Virginia
diagnosed my car for me

Matthew

33 years of experience
1235 reviews
Matthew
33 years of experience
Ford Aspire L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Williamsburg, Virginia
Matthew is the best

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Ford Aspire L4-1.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Jacksonville, Florida
Joel is great- He showed up on time and completed the repair in exactly the time I had asked him how long he thought it would take. The cars running great again. I recommend Joel.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Ford Aspire services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Speedometer Sensor
Common signs include the speedometer not working, cruise control not engaging, Check Engine Light coming on, and loss of power.
How Long Does a Ballast Resistor Last?
A A ballast resistor is a component in the ignition system of older vehicles. If you drive a classic, you are familiar with coils and points. You don’t have an onboard computer, and obviously you don’t have circuit boards that...
How to Replace a Tail Light on SUVs, Vans, and Hatchbacks
Tail lights are vital for safety on the road. Over time, a tail light may burn out and require you to replace a bulb or the whole assembly.

Service "A" with low tire pressure reading needing scheduled maintenance.

Service A is supposed to be performed after the first year/10,000 miles of ownership, then every 2 years/20,000 miles going forward. This service includes: Oil and filter change (https://www.yourmechanic.com/services/change-oil-and-filter) Resetting of the maintenance reminder (https://www.yourmechanic.com/services/reset-maintenance-reminder-system) Tire condition/pressure check (https://www.yourmechanic.com/services/uneven-tire-wear-inspection) (this...

My car is jerking and the engine light is on.

A loose or leaking gas cap will almost never be the cause of a poorly running engine. It will set the check engine light on and set an Evaporative System fault, but will not make the engine jerk or misfire....

getting P1028 & P2006 for 2008 MB C300 but 1.dont feel any loss of power 2.Idle is Not Poor (no)fluctuation

Code P1028 indicates the engine control unit is detecting that the coolant temperature is lower than the thermostat is designed for. This typically can be caused by a thermostat that is stuck open (https://www.yourmechanic.com/services/thermostat-replacement). The thermostat is designed to allow...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com