Dodge Stealth Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Stealth Fuel Injector Replacement is $1148 with $994 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Dodge StealthV6-3.0LService typeFuel Injector ReplacementEstimate$2173.44Shop/Dealer Price$2674.62 - $4168.44
1991 Dodge StealthV6-3.0L TurboService typeFuel Injector ReplacementEstimate$3610.83Shop/Dealer Price$4475.41 - $7064.60
1995 Dodge StealthV6-3.0LService typeFuel Injector ReplacementEstimate$3803.63Shop/Dealer Price$4712.97 - $7435.97
1995 Dodge StealthV6-3.0L TurboService typeFuel Injector ReplacementEstimate$3625.43Shop/Dealer Price$4490.22 - $7079.57
1992 Dodge StealthV6-3.0L TurboService typeFuel Injector ReplacementEstimate$3610.83Shop/Dealer Price$4477.05 - $7067.48
1992 Dodge StealthV6-3.0LService typeFuel Injector ReplacementEstimate$2148.03Shop/Dealer Price$2647.09 - $4139.32
1996 Dodge StealthV6-3.0L TurboService typeFuel Injector ReplacementEstimate$3625.43Shop/Dealer Price$4490.24 - $7079.60
1994 Dodge StealthV6-3.0LService typeFuel Injector ReplacementEstimate$3803.63Shop/Dealer Price$4712.97 - $7435.97
Show example Dodge Stealth Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Augie

32 years of experience
263 reviews
Augie
32 years of experience
Dodge Stealth V6-3.0L - Car will not turn over - Valencia, California
He was excellent; professional, patient, tolerant. My car on the other hand was totally uncooperative, it behaved as though nothing was wrong and made me look like a crazy hysterical woman! So I wasted $80.00 on a tempermental, sneaky, psychotic attention seeking car! ...I should send it to the crusher!

Tom

43 years of experience
205 reviews
Tom
43 years of experience
Dodge Stealth V6-3.0L - Oil Change - San Jose, California
Tom was on time which means a lot. I know somewhat about cars and Tom told me what to expect and I told him to just get it done right, and he did just that, I mean Tom is the 'BOMB'. And the best thing is I didn't have to go looking anywhere, 'Your Mechanic' sends the mechanic to me, what an awesome concept.

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Dodge Stealth V6-3.0L - Brake System Flush - Queen Creek, Arizona
Great service, on time!

Omar

20 years of experience
43 reviews
Omar
20 years of experience
Dodge Stealth V6-3.0L - Battery - Pompano Beach, Florida
Excellent. Will use Omar again and will recommend him.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Dodge Stealth services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

5 Ways to Deal With a Totaled Car After a Car Crash
You have options if you get in a car crash and your car is totaled. You can fix your car, sell individual car parts, or donate your car to charity.
10 Best Stores to Buy Auto Parts in Cincinnati, Ohio
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Cincinnati is AutoZone.
Child Seat Safety Laws in Kentucky
All All states have laws regarding the safe transportation of children, and require the use of child safety seats in motor vehicles. The laws are there for your child’s protection, so it makes sense to learn them and obey them....

Motor ticking and stalling

Initially, check the engine oil for correct level and smell it for a gas smell. If the engine oil level is low, add oil until it is correct. If it smells like gas, then you likely have another issue. Regardless,...

My audi smells like gasoline I read it could be a clogged fuel filter my mechanic wants to replace a plug on my fuel pump

What your mechanic says sounds more likely. There is no gasoline flowing to the turbocharger, so a flange or gasket leak is unlikely to be the cause. A leaking turbo flange would give you an exhaust leak and any odor...

Front brakes grinding after brake pad replacement on a 98 Ford Windstar 3.0L

I have seen where some of the more less expensive semi-metallic brake pads have real rough spots of material in the pad and will make a grinding noise when braking. This is normal for these pads. If noise does not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com