Dodge Spirit Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Dodge Spirit Brake Drum Replacement is $306 with $145 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Dodge SpiritV6-3.0LService typeBrake Drum ReplacementEstimate$631.13Shop/Dealer Price$736.43 - $989.30
1993 Dodge SpiritV6-3.0LService typeBrake Drum ReplacementEstimate$527.64Shop/Dealer Price$627.97 - $877.12
1992 Dodge SpiritL4-2.5LService typeBrake Drum ReplacementEstimate$575.13Shop/Dealer Price$680.47 - $933.38
1989 Dodge SpiritL4-2.5LService typeBrake Drum ReplacementEstimate$555.05Shop/Dealer Price$655.31 - $893.11
1990 Dodge SpiritL4-2.5L TurboService typeBrake Drum ReplacementEstimate$558.89Shop/Dealer Price$660.22 - $900.98
1992 Dodge SpiritL4-2.2L TurboService typeBrake Drum ReplacementEstimate$575.13Shop/Dealer Price$680.47 - $933.38
1991 Dodge SpiritV6-3.0LService typeBrake Drum ReplacementEstimate$589.13Shop/Dealer Price$694.09 - $946.71
1994 Dodge SpiritV6-3.0LService typeBrake Drum ReplacementEstimate$539.14Shop/Dealer Price$640.01 - $889.57
Show example Dodge Spirit Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Dodge Spirit V6-3.0L - Inspection / Diagnostics - Chandler, Arizona
Overall satisfaction

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Dodge Spirit V6-3.0L - Car is not starting - Chandler, Arizona
Peter worked on my car again today and like usual he was a 1/2 hour early. Honest, courteous and trustworthy. He worked on my car and I asked him, to please get me back on the road, because I needed the car for work. Peter went above and beyond to fix my car. He found the parts for my car, which was not easy to find, but with determination he found them. Thank you so much Peter. And to all, this mechanic is the most honest mechanic I have ever met in my entire life. Abe

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Dodge Spirit V6-3.0L - Radiator Hose Repair - Chandler, Arizona
I am still a satisfied customer. Peter did a excellent job fixing my car. He was on-time again, explained to me in detail what was needed and what he did to fix my car. He is very patient and meticulous with every detail. He even cleaned up my garage floor under my car when he was done. He is someone I can really trust. I have recommended him to half my neighbors, co-workers and friends. Thank you Peter so much.

Allen

30 years of experience
49 reviews
Allen
30 years of experience
Dodge Spirit L4-2.5L - Oil Change - Las Vegas, Nevada

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Dodge Spirit services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Lexus GS450h
The The 2012 Lexus GS450h is for those who want to drive a hybrid, but would prefer to still enjoy a luxurious and safe ride. Fortunately, as this sedan proves, going the hybrid route doesn’t have to mean you lose...
P0067 OBD-II Trouble Code: Air Assisted Injector Control Circuit High
P0067 P0067 trouble code definition Air Assisted Injector Control Circuit High What the P0067 code means The P0067 code means that the powertrain control module (PCM) is detecting a higher voltage from the air assisted injector system circuit than was...
Louisiana Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Louisiana. Speed limits in Louisiana 75 mph: along 154 miles of Interstate 49 70 mph: as posted along...

Car shutting off even with a new fuel pump.

In my experience I would recheck the fuel pump again since if it fixed the problem only a short period of time, then the new part may be defective. The fuel pressure test would let you know if it is...

Diagnostic code read o2 sensor bad, replaced o2 sensor, cleared code but engine light came back on, is it caused by bad air filter

Hello there. Typically jump starting a vehicle doesn't trigger an OBD-II error code. However, one of the most common misdiagnosis issues with the P-2270 (https://www.yourmechanic.com/article/p2270-obd-ii-trouble-code-o2-sensor-signal-stuck-lean-bank-1-sensor-2-by-jay-safford) is replacing the O2 sensor before diagnosing if there are any exhaust leaks. Obviously, you'll...

How much would it cost to replace a fuel pump on a 2006 GMC Canyon truck offroad

Hi there. You can drop the fuel tank from the bottom of the vehicle to get to the fuel pump. It would require removing the fuel neck, fuel vapor lines to the canister, the electrical harnesses, and the fuel tank...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com