Dodge Ramcharger Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Dodge Ramcharger Wheel Bearings Replacement is $154 with $14 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Dodge RamchargerV8-5.9LService typeWheel Bearings - Driver Side Front ReplacementEstimate$281.74Shop/Dealer Price$295.94 - $325.56
1992 Dodge RamchargerV8-5.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.26 - $363.84
1990 Dodge RamchargerV8-5.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.30 - $363.91
1991 Dodge RamchargerV8-5.2LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.30 - $363.90
1991 Dodge RamchargerV8-5.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$289.01Shop/Dealer Price$311.51 - $367.77
1992 Dodge RamchargerV8-5.9LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$267.32Shop/Dealer Price$278.96 - $306.66
1992 Dodge RamchargerV8-5.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$267.32Shop/Dealer Price$278.76 - $306.31
1991 Dodge RamchargerV8-5.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.30 - $363.90
Show example Dodge Ramcharger Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Diego

17 years of experience
636 reviews
Diego
17 years of experience
Ramcharger 1992 - Fuel Pump - Phoenix, AZ
Simply amazing. Couldn't have asked for a better mechanic. Helped me with all my problems that came forthright. Very knowledgeable.

Nicholas

8 years of experience
518 reviews
Nicholas
8 years of experience
Ramcharger 1984 - Starter - Wake Forest, NC
A-1 Service and A-1 expedience. I would definitely recommend Nick again!! As a matter of fact, I would like to make another appointment for my truck, and I Definitely want to request Nick to do the work!! Thank you for putting the good starter in my truck!!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Dodge Ramcharger services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0290 OBD-II Trouble Code: Cylinder 10 Contribution/Balance Fault
P0290 code means that the cylinder is contributing less power and that there is a fuel delivery problem due to a faulty or clogged fuel injector.
How to Change a Serpentine Belt
Learn how to install a serpentine belt and learn maintenance tips, alignment importance, and the role of tension for optimal vehicle performance.
The Best Used Cars to Buy If Your Kid's On the Soccer Team
If If you are a soccer mom (or dad), you know that you need a lot of space to transport your budding World Cup contenders, along with their gear. From time to time, you can also expect to be bringing...

Coolant leaking from car

Coolant can leak from many places. The radiator, hoses, thermostat housing, freeze plugs, water pump, and heater core for example are all places that are common for coolant to leak from. The leak usually gets worse after the car is...

2003 jeep liberty stuck in reverse, shifter is stuck...but crawling under and trying to manually shift from transmission stuck

Hi there. Based on what you have written above, it is highly probable that the inner linkage has come loose or there is an obstruction within the inner gear set that is causing your problem. Unfortunately, this typically requires dropping...

My car twice out of 4 times today would not start on the first time. Second time started fine. At 2 read lights it was sort of je

Hello, thank you for writing in. Your symptoms point towards an issue with fuel or spark. If you just had work done on the fuel system, you may wan to have your fuel pressure tested at the engine. This will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com