Dodge Grand Caravan Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Dodge Grand Caravan Wheel Stud Replacement is $121 with $26 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Dodge Grand CaravanV6-3.0LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$166.19Shop/Dealer Price$188.99 - $234.89
1995 Dodge Grand CaravanV6-3.8LService typeWheel Stud - Driver Side Front ReplacementEstimate$157.59Shop/Dealer Price$183.26 - $237.72
1987 Dodge Grand CaravanL4-2.5LService typeWheel Stud - Driver Side Front ReplacementEstimate$276.89Shop/Dealer Price$332.38 - $476.32
2008 Dodge Grand CaravanV6-3.3LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$335.99Shop/Dealer Price$406.24 - $594.48
2012 Dodge Grand CaravanV6-3.6LService typeWheel Stud - Driver Side Rear ReplacementEstimate$335.99Shop/Dealer Price$406.27 - $594.55
1989 Dodge Grand CaravanL4-2.5L TurboService typeWheel Stud - Driver Side Rear ReplacementEstimate$203.79Shop/Dealer Price$241.01 - $330.12
1995 Dodge Grand CaravanV6-3.8LService typeWheel Stud - Passenger Side Front ReplacementEstimate$162.59Shop/Dealer Price$188.12 - $242.48
1997 Dodge Grand CaravanV6-3.0LService typeWheel Stud - Driver Side Rear ReplacementEstimate$267.29Shop/Dealer Price$319.37 - $452.54
Show example Dodge Grand Caravan Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Dodge Grand Caravan Wheel Stud Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Fill a Windshield Wiper Fluid Reservoir
Driving Driving with a dirty windshield is not only a distraction, but it can make navigating roads difficult and dangerous as well. Dirt, grime, and mud can eventually smudge your windshield so completely that it becomes impossible to drive. Keeping...
How to Know When Your Transmission Is Not Working
Most vehicles use some sort of transmission to transfer the power generated from the engine, into usable power that can turn the wheels....
How to Find the Radio Code to Unlock a Car Stereo
Need into your car’s stereo? Here are four handy sources for finding the radio code to access all the functions of your car’s infotainment system.

My catalytic converters need to be replaced

Hi there, thanks for writing in. First of all, removing a catalytic converter is illegal in all 50 states. They are federal emissions items, and there is a very stiff fine for removing or tampering with them on a vehicle...

There is hesitation to press the accelerator during engine start and cold engine

Hello, thanks for writing in about your Toyota Camry. You should have the fuel injectors and combustible chambers cleaned of carbon deposits. The build up of carbon on the valves and injectors can cause the engine to run rough (https://www.yourmechanic.com/services/car-idle-is-rough-inspection)...

When I start the car it will idle but when I push on the gas pedal no gas goes through and car shuts off. You have to wait 3-4 minutes for the car to start and it does the same thing over again

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com