Dodge D250 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(84)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(84)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Dodge D250 Power Steering Pump Replacement is $257 with $75 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Dodge D250V8-5.2LService typePower Steering Pump ReplacementEstimate$910.28Shop/Dealer Price$1085.13 - $1597.51
1991 Dodge D250V8-5.2LService typePower Steering Pump ReplacementEstimate$867.57Shop/Dealer Price$1039.40 - $1549.52
1991 Dodge D250V8-5.9LService typePower Steering Pump ReplacementEstimate$873.21Shop/Dealer Price$1046.48 - $1560.86
1992 Dodge D250V6-3.9LService typePower Steering Pump ReplacementEstimate$653.91Shop/Dealer Price$772.35 - $1122.25
1993 Dodge D250L6-5.9L Turbo DieselService typePower Steering Pump ReplacementEstimate$1182.87Shop/Dealer Price$1428.83 - $2155.49
1992 Dodge D250L6-5.9L Turbo DieselService typePower Steering Pump ReplacementEstimate$1328.86Shop/Dealer Price$1574.82 - $2301.48
1990 Dodge D250V8-5.2LService typePower Steering Pump ReplacementEstimate$415.57Shop/Dealer Price$474.45 - $645.61
1990 Dodge D250L6-5.9L Turbo DieselService typePower Steering Pump ReplacementEstimate$1153.67Shop/Dealer Price$1397.05 - $2121.77
Show example Dodge D250 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(84)

Rating Summary
79
2
0
0
3
79
2
0
0
3

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Dodge D250 V8-5.9L - Serpentine/Drive Belt - Austin, Texas
Very friendly. Did a great job and fast.

Mark

25 years of experience
116 reviews
Mark
25 years of experience
Dodge Ram 2500 V8-5.7L - Power Steering Pump - Northbrook, Illinois
Excellent mechanic

Jeffrey

33 years of experience
3 reviews
Jeffrey
33 years of experience
Dodge Ram 1500 V8-5.9L - Power Steering Pump - Clayton, North Carolina
Knew what he was doing very professional

Chris

12 years of experience
281 reviews
Chris
12 years of experience
Dodge Dakota V6-3.7L - Power Steering Pump - Cave Creek, Arizona
excellent service

Excellent Rating

(84)

Rating Summary
79
2
0
0
3
79
2
0
0
3
Number of Dodge Power Steering Pump Replacement services completed
924+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Instrument Voltage Regulator
Common signs include dim or flickering gauges, inaccurate or erratic readings from the voltage regulator, and an inoperable instrument cluster.
A Buyer’s Guide to the 2012 GMC Yukon
When When you want a big SUV that can hold its own, come what may, you’ll be happiest with a GMC Yukon. Although the inside of one of these vehicles can sometimes resemble an upscale hotel room, the 2012 GMC...
How to Get an Alaska Driver's Permit
In In order to begin driving on the roads in Alaska, anyone under the age of 16 years old must apply for and receive an Alaska Instruction Permit. This driver’s permit allows those who are at least 14 years old...

How do you dehumidify the interior?

While your Accord is designed to protect you against temperature extremes, it’s not airtight. That means humidity can rise in the cabin. To dehumidify the air, just follow these easy steps: Switch on the fan. Switch the air conditioning on...

Lost power steering and now my brake and battery light are on is the car safe to drive

Check the brake fluid level in the master cylinder. If the fluid level is normal and the brakes work normally, it might be safe to drive to a repair shop but beyond that, no, it is definitely not safe to...

Should I use windshield washer fluid to defrost my front windshield 2016 Nissan Altima

Hi There, You can certainly use the window washer fluid in your car to spray on the windshield when defrosting your windshield. As you may know, most window washer fluid contain an alcohol solution in them that reduces the freezing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com