Chrysler PT Cruiser Clutch pedal goes all the way to the floor Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(951)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(951)

Clutch pedal goes all the way to the floor Inspection Service

How much does a Clutch pedal goes all the way to the floor Inspection cost?

On average, the cost for a Chrysler PT Cruiser Clutch pedal goes all the way to the floor Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chrysler PT CruiserL4-2.4L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Chrysler PT CruiserL4-2.4LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Chrysler PT CruiserL4-2.4LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Chrysler PT CruiserL4-2.4L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Chrysler PT CruiserL4-2.4LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Chrysler PT CruiserL4-2.4LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Chrysler PT CruiserL4-2.4L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2009 Chrysler PT CruiserL4-2.4LService typeClutch pedal goes all the way to the floor InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chrysler PT Cruiser Clutch pedal goes all the way to the floor Inspection prices

Like your brake pedal, your clutch pedal should have a firm feel when you press it. It should offer resistance as you push it toward the floor, and stop shy of the actual floorboard. When you depress the pedal, you should also be able to change gears. However, if your clutch pedal goes all the way to the floor and you can’t change gears, there’s definitely something wrong. The problem will depend on the type of clutch system in your car.

How this system works:

There are two types of clutch systems used in manual transmission vehicles – cable operated and hydraulic. Cable systems were more common a few years ago, but hydraulic systems have gained in popularity, so there’s a 50/50 chance you’ll have either.

The simplest way to tell is to open the hood and see if you can spot two components on the firewall that look like master cylinders. One is the master cylinder for your brakes, and the other is the clutch master cylinder. If you don’t see two things that look like master cylinders, you have a cable-operated clutch.

If you have a cable-operated clutch, chances are good that the cable has broken (this is very common, and will occur as your car ages unless you take preemptive action and replace the cable before it snaps). The cable runs from the clutch pedal to the clutch assembly itself, and allows you to engage the clutch and change gears.

If you have a hydraulic clutch, the problem is likely with the master or slave cylinder. These work in the same way as your brake hydraulic system. When you press the pedal, it pressurizes the fluid in the system, which then allows you to change gears. If the fluid is low, or the master or slave cylinder has failed, you won’t be able to change gears.

Common reasons for this to happen:

  • Broken Clutch Cable: The most common reason to have a clutch pedal that goes all the way to the floor is a broken clutch cable. This is extremely common, particularly on older cars. Replacing the cable will allow you to engage the clutch and change gears once more.

  • Missing Connector Rod: The clutch cable runs to a throw out fork and bearing. It connects with a small rod. If this rod is missing, the cable won’t attach to the fork and your pedal will go to the floor.

  • Low Fluid: If you have a hydraulic clutch, there are a couple of other things it could be. One is low fluid in the master/slave cylinder. This can be checked by visually inspecting the reservoir. If the fluid is below the “full” line, then you have low fluid.

  • Failed Clutch Master Cylinder: The most common way for a clutch master cylinder to fail is for the internal seals to begin leaking fluid out (meaning that you’ll be low on fluid). This fluid may or may not run onto the clutch pedal, and it may or may not be visible on the firewall or the back of the engine.

  • Failed Slave Cylinder: A failed slave cylinder is less common than a failed master cylinder, but the symptoms (and causes) are generally the same. Seals break down and begin leaking, leading to low fluid levels in the system.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch pedal, the cable or hydraulic system to verify operation and determine the actual cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first inspect the clutch pedal, as well as its connection to either the clutch cable or the master cylinder. The mechanic will check the fluid level in the reservoir if this is a hydraulic system, as well as inspecting for leaks.

How important is this service?

If your clutch pedal goes to the floor, you won’t be able to engage the clutch, and you won’t be able to shift gears. In short, you’ll be stuck. Driving without an operable clutch cable is not recommended. One of our professional mechanics can inspect and repair your clutch system.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(951)

Rating Summary
894
35
7
3
12
894
35
7
3
12

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Chrysler PT Cruiser L4-2.4L - Water Pump - La Mirada, California
I'm very happy with Juan, He is a very Qualified mechanic . He did a great job on my PT repair. Very hard to work on ...(no room in engine compartment.) If you have a choice -- Ask For Juan Vargas to do you work,

Dan

39 years of experience
987 reviews
Dan
39 years of experience
Chrysler PT Cruiser L4-2.4L - Car is not starting - Lawrenceville, Georgia
Very nice and knowledgeable man!

Keith

18 years of experience
374 reviews
Keith
18 years of experience
Chrysler PT Cruiser L4-2.4L - Window is not working - Winter Haven, Florida
Keith was very pleasant and prodessional

James

25 years of experience
67 reviews
James
25 years of experience
Chrysler PT Cruiser L4-2.4L - Alternator - Nashville, Tennessee
can't say enough how much I appreciate the work he did

Excellent Rating

(951)

Rating Summary
894
35
7
3
12
894
35
7
3
12
Number of Chrysler PT Cruiser services completed
10461+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Toyota Highlander
While While the original Highlander was more of a wagon than an SUV, the 2012 Toyota Highlander is an entirely different beast. It’s large enough to compete with the cargo and passenger capacity of a Honda CR-V, but it’s small...
How Do I Prepare My Car for Summer?
Summer's Summer's heat, dust, and stop-and-go traffic will take their tolls on your vehicle. Follow these tips to ensure optimum wellness of your car: Air Conditioning: Have your air conditioning inspected (https://www.yourmechanic.com/services/heating-ac-inspection) by a qualified technician. Newer models have cabin...
How to Detect Odometer Fraud
When When you buy a vehicle, one of the influencing factors is how many miles are on the odometer. That simple number can give a good indication of several items including: An indication of upcoming maintenance and repairs How well...

1992 Ford Taurus won't go into gear

Though the information provided on your Ford Taurus is a bit limited, I can make a first suggestion that will hopefully lead us in the right direction. While attempting to shift out of park, carefully feel the gear selector as...

Stalling, cutting out, dieing while driving

This is a common symptom of a failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or faulty throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement). The mass air flow sensor regulates the air flow into the intake system as it is mixed with fuel prior to...

Where is the Knock sensor on a 2012 cruze eco 1.8L

The knock sensor is mounted to the rear of the cylinder block (i.e, the side of the block nearest the firewall) toward the crankshaft pulley. The car must lifted somewhat and safety stands must be placed. Please be aware that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com